- Chứng nhận sản phẩm Châu Âu CE
- Chứng nhận thiết bị y tế Trung
- Chứng nhận thực phẩm&dược phẩm FDA
- Chứng nhận sản phẩm của EU
- Chứng nhận sản phẩm Bắc Mỹ
- Chứng nhận Mỹ
- Chứng nhận UL của Mỹ
- Chứng nhận FCC Mỹ
- Chứng nhận của Bộ Giao thông Vận tải DOT Hoa Kỳ
- Chứng nhận Hiệp hội Dầu khí API Hoa Kỳ
- Chứng nhận Hiệp hội Nội thất Văn phòng BIFMA của Mỹ
- Chứng nhận khẩu trang NELNSON của Mỹ
- Thử nghiệm CPSIA An toàn Sản phẩm Tiêu dùng Hoa Kỳ
- Chứng nhận Hội kỹ sư ô tô Mỹ SAE
- Chứng nhận điện tử ETL Hoa Kỳ
- Chứng nhận Canada
- Chứng nhận Mexico
- Chứng nhận Mỹ
- Chứng nhận sản phẩm Nam Mỹ
- Chứng nhận sản phẩm EAC Liên minh HQ
- Chứng nhận sản phẩm Trung Đông
- Chứng nhận sản phẩm châu Á
- Chứng nhận sản phẩm Đài Loan
- Chứng nhận sản phẩm châu Phi
- Chứng nhận sản phẩm của Úc
- Chứng nhận sản phẩm Halal
- Chứng nhận sản phẩm Do Thái Kosher
- Loại một thiết bị y tế cho hồ
- Chứng nhận sản phẩm Trung Quốc
- Chứng nhận sản phẩm hữu cơ
- Chứng nhận an toàn hóa chất MSDS
- Chứng nhận sản phẩm CB
- Kiểm tra an toàn / kiểm tra sản phẩm
- Kiểm tra sản phẩm / lấy mẫu sản phẩm
- Tiêu chuẩn sản phẩm các quốc gia
- CHỨNG NHẬN HACCP
◆ORIGO chứng nhận quốc tế ◆
◆Sanwei International
Certification Ltd◆
Email.:salestw.origo@gmail.com
Chất lượng dịch vụ : Chuyên nghiệp, công bằng và công chính
Thái độ làm việc.: chính trực, nghiêm ngặt, tận tình
Bluetooth QPL Danh mục sản phẩm tất cả các giấy phép Bluetooth, hệ thống con, các thành phần và các công cụ phát triển. Các sản phẩm được liệt kê trong QPL được phân phối trên toàn thế giới bởi các tập đoàn chứng nhận Bluetooth (BQBs) đặc biệt có thẩm quyền. Bất kỳ BQB có thể đánh giá , chứng nhận, và liệt kê ra bất kỳ sản phẩm chứng nhận nào. Tham gia BQB sớm có thể giảm thiểu thời gian và chi phí phát triển sản phẩm.
Tài liệu chính sách chứng nhận sản phẩm Bluetooth trong PRD, được phát triển bởi Ủy ban đánh giá chứng nhận Bluetooth (BQRB) chế định, được tạo ra bởi Ủy ban bầu cử từ 9 Bluetooth SIG doanh nghiệp sản phẩm đại diện. Chương trình chứng nhận đại diện do quản lý chứng nhận Bluetooth của đại diện BQRB (BQA) chịu trách nhiệm.
BQRB công nhận cơ quan chứng nhận Bluetooth cá nhân (BQBs), xác thực và ủy quyền cho họ vào danh sách các sản phẩm. BQRB cũng công nhận các thiết bị thông qua thử nghiệm chứng nhận Bluetooth hợp lệ (BQTFs) , thông qua công nhận như một thực hiện có hiệu quả và báo cáo kết quả thí nghiệm Class A (xem mô tả về quá trình chứng nhận để biết thông tin chi tiết hơn). BQRB cũng công nhận giám định viên công nghệ Bluetooth, và họ được đánh giá cao và đề nghị các ứng cử viên BQTF.
Cơ quan chứng nhận Bluetooth (BQB) được ủy quyền của các BQRB, nhóm cần phải cung cấp dịch vụ cho các thành viên của chứng nhận sản phẩm Bluetooth. Thành viên nhận dịch vụ chứng nhận trực tiếp thông qua BQB. BQB là trách nhiệm kiểm tra tờ khai không tuân thủ và tài liệu hướng dẫn, đánh giá các báo cáo thử nghiệm sản phẩm, các sản phẩm Bluetooth được liệt kê trong chính thức được cấp phép sản phẩm cơ sở dữ liệu. BQB phải là một thành viên hoặc một nhân viên của Bluetooth SIG. BQB là một cá nhân độc lập, và không đòi hỏi các tổ chức liên kết sản xuất thử nghiệm.
Dấu chứng nhận BQB là:
Cơ quan kiểm tra
Cơ quan kiểm tra cấp giấy chứng nhận Bluetooth (BQTF) là kết quả của BQRB chính thức công nhận, để hoàn thành tài liệu tham khảo trường hợp thử nghiệm để "Loại A" bài kiểm tra trình độ chuyên môn phù hợp Bluetooth để xác định danh sách (TCRL). BQTF mô tả có thẩm quyền về vai trò của Bluetooth Trình độ chuyên môn Chương trình tham khảo tài liệu (PRD) trong phần 4.3.3. Các thành viên có thể sử dụng BQTF trực tiếp cho các dịch vụ thử nghiệm. Nói chung, BQTF cũng có thể cung cấp các dịch vụ thử nghiệm Bluetooth bổ sung.
Phạm vi năng lực
1, RF thử nghiệm thống nhất, bao gồm RF, baseband và thông số kỹ thuật kiểm tra vật lý.
2, Thỏa thuận và tiết diện thử nghiệm phải thống nhất, bao gồm baseband, quản lý liên kết, L2CAP và tiết diện phải thống nhất trong thử nghiệm kỹ thuật.
Năng lực thử nghiệm thống nhất BQTF có thể tham khảo thử nghiệm trạng thái và năng lực ngoại lệ. Thông tin về quá trình chứng nhận BQTF và tiêu chuẩn có thể tham khảo trang đệ trình BQTF.
Giấy phép chứng nhận
Nhiệm vụ của nhận viên đánh giá kỹ thuật Bluetooth (BTA) là đại diện của Uỷ ban Thẩm định Trình độ chuyên môn Bluetooth (BQRB), để chỉ định một thử nghiệm phù hợp Bluetooth và khả năng hậu kỹ thuật ủy quyền của Bluetooth SIG, như một năng lực kỹ thuật của cơ quan thử nghiệm của thiết bị thử nghiệm chứng nhận Bluetooth (BQTF) .
Dự án thử nghiệm
this Test Case Status & Capabilities page includes test case descriptions and categories, BQTF test capabilities and validated test equipment capabilities. The official TCRL spreadsheet
file takes precedence over this Test Case Status table in the event of any discrepancy between them.
Kiểm tra
Chỉ định kiểm tra tiết diện khả năng tương tác (DPIT) là hữu ích để thử nghiệm khả năng tương tác sản phẩm. DPITs trang xử lý mô tả được lựa chọn, bao gồm giai đoạn Pre-PIT;
Nó cũng mô tả sự tương tác trong việc thực hiện các bài kiểm tra chéo, làm thế nào để sử dụng PrePITs và DPITs và trong hoàn cảnh nào. Trang này giải thích và bổ sung Mục 5.4.4 của PRD.
Các khoản PITs hiện hành như sau:
Danh sách Pre-PIT
• Danh sách DPIT
Kiểm tra DPIT:
DPIT sàng lọc được chia thành ba giai đoạn: đánh giá BQB và giai đoạn danh sách PrePIT, giai đoạn đánh giá PrePIT và đánh giá BQRB và quyết định giai đoạn cuối cùng.
Giai đoạn đầu tiên, các thành viên gia nhập đánh giá BQB, sản phẩm chứng nhận của họ có cần phù hợp với yêu cầu của PrePIT. Khi tất cả các tiêu chí đủ điều kiện, BQB liệt kê sản phẩm vào Pre-TNCN.
Giai đoạn thứ hai, tất cả các Pre-PIT sẽ sử dụng đều do thành viên Bluetooth SIG tiến hành kiểm tra. Thành viên được mời để đánh giá được liệt kê Pre- PIT, sẽ được trình lên thông tin phản hồi tích cực hoặc tiêu cực đến BQRB bởi BQA.
Giai đoạn tiếp theo là đánh giá, BQRB sẽ xem lại danh sách kết quả kiểm tra và thông tin phản hồi, và xem xét liệu các sản phẩm được chỉ định là DPIT.
Khi các thành viên yêu cầu hoặc BQRB của việc xem xét cuối cùng, tư cách Pre-PIT cũng có thể bị hủy bỏ.
Tiêu chuẩn Pre-PIT
Dưới đây liệt kê ra chứng nhận giai đoạn đánh giá pre-pit của BQB phải chuẩn bị những điều kiện tiêu chuẩn thấp nhất .
• Sản phẩm có ít nhất một tiết diện Bluetooth, phù hợp với đặc điểm kỹ thuật 1.0 Bluetooth hoặc đặc điểm kỹ thuật được cập nhật và thử nghiệm khả năng tương tác tương ứng.
• Sản phẩm phải tuân thủ các cấu hình hỗ trợ PRE-PIT và vai trò.
• Sản phẩm này có thể không bao gồm bản gốc, nhưng đã từ bỏ tư cách chứng nhận tiết diện.
• Xác định vai trò ứng dụng quy định và hồ sơ kiểm tra thích nghi, mà "B" loại thử nghiệm đã được đáp ứng các đề xuất PRE-PIT,
PRE-PIT là kết quả của BQB thử nghiệm thành công của các sản phẩm khác và chỉ ra rằng việc định giá sau đó đã được chứng nhận và kết luận.
• Trong quá trình thử nghiệm các bước chấp hành phải với các bước thử nghiệm mà người đệ trình Pre-PIT là khác nhau.
• Các tài liệu tiết diện và vai trò của nó được cung cấp bởi người nộp đơn phải đáp ứng các tiêu chuẩn mà Pre-PIT yêu cầu.
• Sản phẩm cho DPIT hồ bơi có sự đa dạng, bao gồm, ví dụ để thực hiện hơn các thành phần DPIT Bluetooth hiện có cần hồ sơ mục tiêu là khác nhau.
• Sản phẩm phải đảm bảo rằng các thành viên, BQB và BQTF có thể thu được thông qua việc mua đúng đắn về mặt thương mại trong vòng 60 ngày.
• Tất cả các sản phẩm phải được liệt kê các thành phần được sử dụng trong các thành viên BQB và các sản phẩm đặt hàng.
Bên cạnh đó, việc áp dụng thành viên đề xuất thay mặt cho các công ty tham gia vào tổ chức UPF gần nhất.
Trước khi cấp giấy chứng nhận PRE-PIT, khi đánh giá sản phẩm BQB có thể yêu cầu các thành viên nộp thông tin kỹ thuật sản phẩm.
Tất cả các báo cáo thử nghiệm và thông tin phản hồi về PRE-PIT phải nộp cho cơ BQB xét sẵn sàng BQRB.
Danh sách thành viên
Thành viên có thể yêu cầu BQB chỉ ra rằng một sản phẩm đủ điều kiện để theo hướng dẫn được mô tả trong mục này, hồ sơ sau một hồ sơ cụ thể hơn về các thử nghiệm tương tác chéo ( "PRE-PIT"). BQB liệt kê ra các sản phẩm của pre-pit có đủ tất cả các tiêu chuẩn PRE-PIT. Mỗi danh sách PRE-PIT phải bao gồm những nội dung sau:
• Tất cả các tiết diện hỗ trợ và vai trò chỉ định của từng tiết diện (ví dụ: khách hàng, máy chủ, vv)
• Từng bộ phận của PICS (xác định các đặc điểm thực hiện bắt buộc và không bắt buộc).
• Mỗi tiết diện và vai trò được chỉ định đáp ứng điều kiện kiểm tra "B".
• Tài liệu cho PIT (đính kèm mỗi tiết diện và vai trò).
• Các sản phẩm được liệt kê phải vượt qua kiểm tra "B".
• Thực hiện phải được ghi rõ trong quá trình thử nghiệm là khác nhau từ DPIT được áp dụng.
• Phải bao gồm việc thu thập PRE-PIT để chuẩn bị cho việc xem xét các điều khoản cụ thể và thông tin công ty liên lạc.
Đánh giá Pre-PIT
Các thành viên kiểm tra phải nộp một sản phẩm yêu cầu thử nghiệm Pre-PIT sử dụng với các yêu cầu dưới đây đến Bluetooth SIG. Là một phần của thử nghiệm và đánh giá, Bluetooth SIG sẽ sử dụng công cụ kiểm tra cơ chế quy định đối với sản phẩm để thử nghiệm, và quá trình thử nghiệm hoàn toàn miễn phí cho các thành viên. Sau khi đánh giá hoàn thành, sản phẩm được kiểm tra sẽ được trả lại cho thành viên.
Các thành viên được khuyến khích nhưng không bắt buộc phải kiểm tra PRE-PIT được liệt kê. Sau khi danh sách PRE-PIT, BQA danh sách này sẽ thông báo cho BTAB và BQRB, và yêu cầu tất cả các tài liệu báo cáo BQB tất cả các thông tin về bốn tuần tới về PRE-PIT để chuyển vào tất cả thông tin của DPIT . Ví dụ, ghi lại lý do đầy đủ mà nó có thể đạt được PRE-PIT.
BQRB sàng lọc DPIT
Sau giai đoạn đánh giá, BQRB phải đề cập đến tất cả các báo cáo PRE-PIT. BQRB có thể quyết định: a. Phê duyệt DPIT; b. Công khai báo cáo đánh giá chưa điều tra được quan tâm; c. hủy các sản phẩm đủ điều kiện PRE-PIT . BQA sẽ ngay lập tức cập nhật trạng thái đủ điều kiện của sản phẩm.
Cập nhật trên Pre-PIT đến trạng thái thay đổi DPIT, nếu sản phẩm không làm tăng giá trị hiệu quả của DPIT hoặc các yếu tố khác, cho dù các tiêu chuẩn thử nghiệm DPIT tuân thủ sản phẩm,
BQRB có quyền phủ quyết để giữ lại sản phẩm này.
Duy trì
Cách duy trì trạng thái DPIT:
• Sản phẩm này cần duy trì tính nhất quán với các thỏa thuận và đặc điểm kỹ thuật hồ sơ, bao gồm cập nhật những thay đổi TCRL giới thiệu.
Thất bại trong việc đánh giá năng lực sẽ bị hủy bỏ DPIT trong DPIT đã được thử nghiệm đơn vị. Nếu sản phẩm hỗ trợ nhiều cấu hình, một hoặc nhiều cấu hình không khớp,
Chỉ những phần phù hợp với nhau sẽ được DPIT chấp thuận.
• Sản phẩm phải hội đủ điều kiện cấp giấy chứng nhận DPIT lưu ý cần kiểm tra hồ sơ.
• Sản phẩm tiếp tục cung cấp các giá trị hợp lệ cho DPIT.
Không đáp ứng được các yêu cầu của sản phẩm có thể không để ý đã bị từ chối BQRB, và hủy bỏ chứng nhận đủ điều kiện từ danh sách DPIT.
Được cho là không còn cung cấp giá trị hiệu quả của sản phẩm cho hồ DPIT, trong vòng 1 tháng bị BQRB quyết định hủy bỏ tư cách hay không.
Yêu cầu kiểm tra tính tương thích của phần:
Do tiết diện DPIT khác nhau, yêu cầu thử nghiệm khả năng tương tác có thể thay đổi.
Kiểm tra tương tác chéo sử dụng hồ sơ kỹ thuật:
Hồ sơ kiểm tra phải được kiểm tra khả năng tương tác dựa trên các nguyên tắc của hồ sơ kỹ thuật:
• Kiểm tra bảng tài liệu tham khảo để hỗ trợ gánh nặng của phần loại B bằng chứng thử nghiệm khả năng tương tác, và thậm chí có ít nhất hai hỗ trợ DPIT hồ sơ này.
Các thành viên sẽ cung cấp một hình thức xác định bằng kỹ thuật BQB chứng minh rằng nó hỗ trợ khả năng tương tác yêu cầu hồ sơ. Những chứng minh được bắt nguồn từ một mặt cắt ngang của các bài kiểm tra khả năng tương tác cũng có thể bao gồm các bài hát hoặc các phần mềm trình thiết kế.
Ngoài việc cung cấp bằng chứng kỹ thuật, mà còn khuyến khích các thành viên để kiểm tra sản phẩm cho danh sách khả năng tương tác.
Kiểm tra tính tương thích của phần với DPITs:
Sản phẩm đối với sản phẩm "thử nghiệm khả năng tương tác (thử nghiệm loại B) phải hỗ trợ hồ sơ cá nhân Bluetooth cho tất cả các ứng dụng.
BQB theo hướng dẫn của các thành viên trong việc lựa chọn các bài kiểm tra khả năng tương tác DPITs là để cố gắng tăng độ che phủ của tính năng tùy chọn của nó. Ứng dụng của đa số các danh sách mỗi DPITs cắt ngang, sản phẩm phải vượt qua ít nhất hai bài kiểm tra DPIT. Nếu một thành viên của hệ thống Bluetooth thực hiện bất kỳ một phần của tính năng tùy chọn, và có khả năng thực hiện ít nhất một DPIT liên quan kiểm tra khả năng tương tác, thử nghiệm khả năng tương tác chức năng này có thể được hoàn thành. Mô tả chi tiết trong những lợi thế và bất lợi của báo cáo thử nghiệm phải được liệt kê trong danh sách trước khi cung cấp cho BQB.
Khi sử dụng DPIT để kiểm tra khả năng tương tác hồ sơ:
• Phần loại B của các bài kiểm tra khả năng tương tác tồn tại để kiểm tra danh sách tham khảo, có một cấu hình cụ thể để ở 2 chứng nhận của DPIT.
• Tùy thuộc vào các yêu cầu thử nghiệm DPIT chỉ có sẵn trong thời gian 90 ngày thứ hai sau khi xác nhận DPIT trước.
Ngược lại, theo DPIT chỉ ra rằng sự thất bại phải trả tương tác không thể chứng minh rằng sản phẩm không phù hợp với hệ thống Bluetooth. Tất nhiên, đòi hỏi các thành viên để cung cấp cho các tài liệu chứng minh khác phù hợp của họ, bao gồm cả việc sử dụng hợp lý giao hàng giải thích DPIT hoạt động tương tác thất bại. Các thành viên không bắt buộc phải chứng minh DPIT không tuân thủ.
Quy định Bluetooth
Không giống như các tiêu chuẩn không dây khác, các đặc điểm kỹ thuật không dây Bluetooth bao gồm các định nghĩa của các lớp liên kết và lớp ứng dụng, cung cấp dữ liệu hỗ trợ ứng dụng, âm thanh, và các nhà phát triển thư trung tâm. RF Bluetooth đặc điểm kỹ thuật không dây hoạt động trong băng tần 2.4GHz được miễn giấy phép, để đảm bảo tính tương thích của truyền thông toàn cầu. Sử dụng một trải phổ, kỹ thuật nhảy tần, tín hiệu truyền 1600 nhảy / s full duplex tín hiệu truyền đi. Dựa vào 1MHz băng thông theo dải tần số được chia thành 79 kênh, 79 kênh trên truyền bởi thông tin nhảy ngẫu nhiên, cung cấp khả năng miễn dịch tốt hơn. Có thể thiết lập và duy trì tối đa 7 kết nối cùng một lúc.
Đặc điểm kỹ thuật Bluetooth đảm bảo hỗ trợ toàn cầu công nghệ không dây Bluetooth giữa các thiết bị có thể giao tiếp với nhau.
Không hứa hẹn thông báo bản quyền
Những đặc điểm này có bản quyền của tổ chức Bluetooth SIG thúc đẩy tất cả các thành viên. Quyền sử dụng những chi tiết kỹ thuật và bất kỳ thỏa thuận quyền sở hữu trí tuệ liên quan do các thành viên để thúc đẩy các tổ chức và xúc tiến thương mại của các thành viên Bluetooth và Bluetooth SIG và các thành viên của tổ chức của mình để khởi động và hợp tác, các thành viên phi Bluetooth SIG của các thành viên sáng lập và thúc đẩy việc sớm của đặc tả hiệp định Bluetooth. Nhà tài trợ đầu tiên của các quy định của thỏa thuận trong việc thúc đẩy các quyền và nghĩa vụ của các thành viên đã được thúc đẩy các thành viên Bluetooth SIG vào tổ chức.
Hoặc bất kỳ thành viên của các nhà tài trợ đầu không thuộc về việc cấm sử dụng các đặc điểm kỹ thuật Bluetooth SIG. Các thành viên của hiệp định, thỏa thuận khởi đầu và promoter của Hiệp định đưa ra các quyền và nghĩa vụ của thành viên pháp lý. Dưới đây là bị cấm mà không có sự cho phép của các quyền sở hữu trí tuệ, rõ ràng hay mơ hồ xâm phạm. Nếu bạn sử dụng tiêu chuẩn vi phạm Hiệp định thành viên, người khởi xướng của quảng bá đầu tiên của thỏa thuận hoặc thỏa thuận sẽ bị cấm, những cấm đoán sẽ dẫn đến việc thoả thuận trên bản quyền bằng sáng chế trách nhiệm và sẵn sàng thỏa thuận Bluetooth SIG khác hoặc các thành viên khác của tổ chức hoặc nhãn hiệu đã đăng ký Vi phạm nghĩa vụ.
THE SPECIFICATION IS PROVIDED ''AS IS'' WITH NO WARRANTIES WHATSOEVER, INCLUDING ANY WARRANTY OF MERCHANTABILITY, NONINFRINGEMENT, FITNESS FOR ANY PARTICULAR PURPOSE, SATISFACTORY QUALITY, OR REASONABLE SKILL OR CARE, OR ANY WARRANTY ARISING OUT OF ANY COURSE OF DEALING, USAGE, TRADE PRACTICE, PROPOSAL, SPECIFICATION OR SAMPLE.
Trong đó mỗi thành viên phải thừa nhận rằng việc áp dụng các sản phẩm công nghệ Bluetooth để thực hiện theo quy định của pháp luật khác nhau và chính phủ trên khắp thế giới. Các luật này sẽ ảnh hưởng đến các thành phần của sản phẩm Bluetooth, vận hành, sử dụng, thực hiện, và phân phối. Những luật, quy định không giới hạn các tuyến đường, các quy định viễn thông, kiểm soát kỹ thuật chuyển nhượng và các quy tắc sức khỏe và an toàn. Để có được chứng nhận, giấy phép sản phẩm và giấy phép cần thiết trong một số lĩnh vực, mọi thành viên phải chịu trách nhiệm về các sản phẩm quy tắc Bluetooth quy phạm pháp luật của mình một cách độc lập trong phạm vi cho phép của chính họ. Mỗi thành viên phải biết đặc điểm kỹ thuật không cung cấp bất kỳ thông tin về các khía cạnh an ninh của giấy phép, chứng nhận, vv
NOTHING IN THE SPECIFICATION CREATES ANY WARRANTIES, EITHER EXPRESS OR IMPLIED, REGARDING SUCH LAWS OR REGULATIONS. ALL LIABILITY, INCLUDING LIABILITY FOR INFRINGEMENT OF ANY INTELLECTUAL PROPERTY RIGHTS OR FOR NONCOMPLIANCE WITH LAWS, RELATING TO USE OF THE SPECIFICATION IS EXPRESSLY DISCLAIMED. BY USE OF THE SPECIFICATION, EACH MEMBER EXPRESSLY WAIVES ANY CLAIM AGAINST BLUETOOTH SIG AND ITS PROMOTER MEMBERS RELATED TO USE OF THE SPECIFICATION.
Sau khi đặc tả Bluetooth SIG đã được phát hành, tổ chức chịu sự thay đổi và thêm các cấu hình Bluetooth mới cho đặc điểm kỹ thuật của chính quyền địa phương cần thiết hoặc thích hợp.
Quy định hệ thống Bluetooth:
Đặc điểm kỹ thuật lõi 1.2
Đặc điểm kỹ thuật lõi Bluetooth 1.2 (10M zip) được thiết kế cho các nhà phát triển. Nó cung cấp nhiều kinh nghiệm người dùng cho các nhà phát triển đã chuẩn bị tốt cho sự phát triển tương lai của lĩnh vực không dây. Thông số kỹ thuật bao gồm 1.000 loại sản phẩm, các sản phẩm máy tính từ chuột, và một loạt các điện thoại di động để xe. Phiên bản 1.2 tương thích ngược với không chỉ các sản phẩm này, nhưng cũng cố gắng phát triển một sản phẩm chủ đạo hơn như điện thoại di động, tai nghe, PDA, MP3, máy ảnh và máy tính xách tay trong mạng diện cá nhân.
Đặc điểm kỹ thuật lõi 2.0
Đặc điểm kỹ thuật lõi Bluetooth phiên bản 2.0 Bluetooth phổ biến trên thị trường. Nó mở rộng phạm vi truyền dẫn vô tuyến Bluetooth, mở rộng phạm vi truyền tải hiệu quả của nó là 10 mét.
Về việc sử dụng điện thoại di động khi có thời điểm thích hợp với chương trình, có thể hỗ trợ Bluetooth phiên bản 2.0 âm nhạc không dây trả lời điện thoại, do đó bạn có thể trích xuất âm nhạc điện thoại được ghép nối với một Bluetooth-enabled lưu trữ trong Bluetooth.
Đặc điểm kỹ thuật lõi 2.1
Đặc tả lõi Bluetooth 2.1 là phiên bản Bluetooth mới nhất của sản phẩm hiện tại. Nó có thể hỗ trợ kết nối đồng thời đến hai thiết bị không dây Bluetooth, tương tự như chức năng chế độ chờ kép, nhưng nó chỉ có thể hỗ trợ cuộc gọi kết nối với thiết bị Bluetooth.
Đặc điểm kỹ thuật lõi 3.0
Bluetooth lõi là 3.0 " Generic Alternate MAC/PHY"(AMP), mà là một công nghệ RF thay thế mới, cho phép các giao thức ngăn xếp Bluetooth động chọn một tần số vô tuyến thích hợp cho bất kỳ công việc. Ban đầu được dành cho các kỹ thuật đặc điểm kỹ thuật mới bao gồm 802,11 và UMB, nhưng hủy bỏ việc áp dụng các đặc điểm kỹ thuật mới của UMB. Là đặc điểm kỹ thuật mới, tỷ lệ 3,0 chuyển Bluetooth sẽ tự nhiên cao hơn, trong khi bí mật nằm trong giao thức không dây 802.11. Bằng cách kết hợp "802.11 PAL" (giao thức lớp thích ứng), tốc độ truyền dữ liệu Bluetooth 3.0 lên đến khoảng 24Mbps (bạn có thể gọi khi cần thiết 802.11 WI-FI để truyền dữ liệu tốc độ cao). , Là tám lần so với Bluetooth 2.0 giúp bạn dễ dàng cho máy quay video với TV độ nét cao, máy tính để PMP, UMPC để truyền dữ liệu giữa các máy in. Công suất tiêu thụ, truyền tải tốc độ cao của Bluetooth 3.0 sẽ tự nhiên tiêu thụ một lượng lớn dữ liệu qua nhiều năng lượng hơn, nhưng sự ra đời của Enhanced Power Control (EPC) cơ chế, bổ sung 802.11, tiêu thụ điện năng nhàn rỗi thực tế sẽ được giảm đáng kể, vấn đề tiêu thụ điện dự phòng thiết bị Bluetooth Hy vọng sẽ có được một giải pháp sơ bộ. Trong thực tế, Liên minh Bluetooth đang làm việc để phát triển phiên bản công suất thấp của các đặc điểm kỹ thuật mới. Bên cạnh đó, đặc điểm kỹ thuật cũng bao gồm một phương pháp mới kiểm tra chung (GTM) và dữ liệu theo cách phát sóng phi kết nối (UCD) hai công nghệ, và bao gồm một tập hợp các hướng dẫn dài khóa HCI. cũng bị cáo buộc, được trang bị Bluetooth 2.1 mô-đun PC là về mặt lý thuyết có thể để tạo ra một thiết bị Bluetooth 2.1 thông qua bản nâng cấp firmware hỗ trợ Bluetooth 3.0. Các thành viên của Alliance đã bắt đầu phát triển các giải pháp Bluetooth 3.0 cho các nhà sản xuất thiết bị.
Đặc điểm kỹ thuật lõi 4.0
Đặc điểm kỹ thuật Bluetooth 4.0 bao gồm 3 đặc điểm, ví dụ: công nghệ Bluetooth truyền thống, tốc độ cao Bluetooth và Bluetooth tiêu hao năng lượng thấp mới. Bluetooth 4.0 cải tiến chủ yếu phản ánh trên ba khía cạnh, tuổi thọ pin, và các loại thiết bị tiết kiệm năng lượng. Có một chi phí thấp, khả năng tương tác chéo của nhà cung cấp, 3 ms độ trễ, hơn 100 mét đường dài, AES-128, và nhiều tính năng khác . Ngoài ra, Bluetooth 4.0 có hiệu quả khoảng cách truyền dẫn cũng được cải thiện. Hiện nay, khoảng cách truyền dẫn hiệu quả của Bluetooth 10 mét (khoảng 30 feet), và Bluetooth 4.0 khoảng cách truyền dẫn hiệu quả 100 mét (khoảng 200 feet). SIG cho biết, Bluetooth 4.0 đặc điểm kỹ thuật được hoàn thành vào ngày 30 tháng 6 năm 2012, trong khi thiết bị Bluetooth 4.0 có mặt vào cuối năm 2011 hoặc đầu năm.
Thông số kỹ thuật lõi
1.1 Đặc điểm lõi (7MB)
1.0 Đặc điểm lõi (7MB)
Tiết diện và hiệp nghị:
Kiểm tra và chứng nhận:
Đặc điểm kỹ thuật kiểm tra
Hình thức ICS và PIXIT
Danh sách tham khảo trường hợp thử nghiệm
Tài liệu kế hoạch chứng nhận
Bluetooth v1.2
Đặc tả hệ thống Bluetooth 1.2, 2003.11.5 được thông qua, bao gồm bốn tập:
Tập 0 - thư mục chính cho các yêu cầu về nội dung và tính nhất quán
Tập 1 - Danh sách lược đồ và thuật ngữ
Tập 2 - Nhóm hệ thống lõi [Bộ điều khiển]
Tập 3 - Gói hệ thống cốt lõi [Host]
Trong Tập 2 RF, baseband, và giao diện điều khiển quản lý kết nối chính được mô tả một cách chi tiết. Khối lượng ba cặp Liên kết kiểm soát lớp và giao thức thích ứng, giao thức phát hiện dịch vụ, và kiểm soát kiểm tra tổng quát giao thức giao diện truy cập được mô tả một cách chi tiết.
Bluetooth 1.1
Cuốn sách này chứa các đặc điểm kỹ thuật Bluetooth đặc điểm kỹ thuật Bluetooth radio, baseband, quản lý liên kết, L2CAP, khám phá dịch vụ, RFCOMM, thông số kỹ thuật IrDA và cốt lõi khác.
Phụ lục bao gồm các sửa đổi đối với Phần I: 2, các yêu cầu tuân thủ.
Phát hành dịch vụ errata 1, thông qua ngày 2003/04/30 (phiên bản 1.02, phát hành vào ngày 2003/08/25), bao gồm đặc điểm kỹ thuật hệ thống v1.1 errata.
Bluetooth v1.1
Bluetooth đặc điểm kỹ thuật Tập II cung cấp hướng dẫn chi tiết để hỗ trợ hồ sơ sử dụng Bluetooth. Các thông số này chứa các phần sau:
Tiếp cận phổ cập, ứng dụng khám phá dịch vụ, điện thoại không dây, máy liên lạc, cổng nối tiếp, tai nghe, Internet dial-up, Fax, LAN, Exchange Object Generic, Object, chuyển tập tin, đồng bộ hóa.
Số phân bổ
Trang web này cung cấp danh sách đầy đủ các số thiết bị hiện được chỉ định có sẵn.
Đặc tả hồ sơ bổ sung Bluetooth:
Sau khi sử dụng các đặc điểm kỹ thuật v1.1, đã giới thiệu một bộ thêm các thỏa thuận và đặc điểm kỹ thuật hồ sơ thi tuyển Bluetooth. 6.4M lưu trữ (trên) có chứa các phiên bản mới nhất của các cấu hình ứng dụng sau đây của các thỏa thuận và chỉ tiêu:
Hiệp nghị
Giao thức truyền dẫn điều khiển âm thanh (AVCTP) V0.95a
Giao thức truyền dẫn điều khiển âm thanh (AVCTP) v1.0
Giao thức truyền tải phân tán âm thanh (AVDTP) V0.95b
Giao thức phân phối âm thanh phân tán (AVDTP) V1.0
Thỏa thuận đóng gói mạng Bluetooth (BNEP) V0.95a
Thỏa thuận đóng gói mạng Bluetooth (BNEP) V1.0
Tiết diện
Cấu hình phân phối âm thanh nâng cao (A2DP) V0.95b
Cấu hình phân phối âm thanh nâng cao (A2DP) V1.0
Cấu hình điều khiển từ xa video âm thanh (AVRCP) V0.95b
Cấu hình điều khiển từ xa video âm thanh (AVRCP) V1.0
Cấu hình phân phối video âm thanh (AVVDP) V0.95 rc7
Cấu hình hình ảnh cơ bản (BIP) V0.95c
Cấu hình hình ảnh cơ bản (BIP) v1.0
Cấu hình in cơ bản (BPP) V0.95a
Hồ sơ truy cập ISDN công cộng (CIP) V0.95
Cấu hình truy cập ISDN công cộng (CIP) V1.0
Hồ sơ khám phá dịch vụ mở rộng (ESDP) V0.95a
Âm thanh nói chung và video phân phối mặt cắt ngang (GAVDP) V0.95b
Cấu hình phân phối âm thanh và video phổ quát (GAVDP) V1.0
Cấu hình rảnh tay (HFP) V0.96
Hồ sơ rảnh tay (HFP) V1.0m
Cấu hình thay thế cáp sao chép cứng (HCRP) V0.95a
Cấu hình thay thế cáp sao chép cứng (HCRP) V1.0a
Giao diện thiết bị của con người (HID) V0.95c
Nhân hồ sơ thiết bị giao diện (HID) V1.0
Cấu hình mạng cá nhân (PAN) V0.95a
Cấu hình mạng cá nhân (PAN) V1.0
Tổng quan về tổ chức
Bắt đầu bởi tổ chức Bluetooth SIG bao gồm Agere, Ericsson, IBM, Intel, Microsoft, Motorola, Nokia và Toshiba và các công ty hàng đầu khác trong lĩnh vực truyền thông, lĩnh vực phần mềm, lĩnh vực máy tính, cũng bao gồm hàng trăm lĩnh vực khác nhau của công ty.
Tất cả thành viên
Lúc đầu, các hoạt động của tổ chức Bluetooth SIG phải dựa vào một số ít nhân viên để duy trì một chi tiết của một công ty thành viên SIG công nhân tự tổ chức một bộ phận của công việc không được trả lương để hoàn thành SIG công việc, nguồn nhân lực SIG của tổ chức trước khi họ nhận được Cải thiện. Vào tháng Bảy năm 2002, Bluetooth SIG tổ chức quản lý trụ sở toàn cầu thiết lập ở Kansas Overland Park. Nhân viên, trong đó có giám đốc điều hành Mike McCamon, kỹ sư và các nhà quản lý tiếp thị kỹ thuật và một vài trong số Gongcheng Bu.
Nguồn thành viên
Ngoài nhân viên của các tổ chức của Bluetooth SIG, tình nguyện viên từ các công ty thành viên SIG đóng một vai trò rất quan trọng trong việc tổ chức Bluetooth SIG công việc và dịch vụ. Những công việc tình nguyện thành lập hầu hết các phòng ban làm việc, trong đó chủ yếu là tham gia vào các lĩnh vực chuyên môn, chẳng hạn như bộ phận kỹ thuật, bộ phận kiểm tra chất lượng và tiếp thị các vụ chức năng. Hôm nay, các công ty thành viên SIG, sự phát triển và chứng nhận sản phẩm đồng thời là một thành viên của nhóm làm việc, cũng cam kết. SIG sản phẩm cơ cấu tổ chức cũng cung cấp một lĩnh vực công việc chính thức, được thiết kế để hỗ trợ sự phát triển của các sản phẩm của mỗi công ty để thử nghiệm và chứng nhận.
---------------------------------------------------------------------------------------------
In short, if your product is Bluetooth-enabled and has a Bluetooth logo on its appearance, it must pass a certification called BQB. Bluetooth authentication is BQB certification Bluetooth certification is a certification program that must pass for any product using Bluetooth wireless technology. The Bluetooth wireless technology defined in the Bluetooth system specification allows short-range wireless data connections between devices. The Bluetooth authentication program reference documentation is the standard reference for the product certification process. Members of the Bluetooth Special Interest Group have privileged free rights to use Bluetooth wireless technology in the product list of the Bluetooth Certified Product List (QPL). Bluetooth SIG members are free.
Bluetooth QPL lists all licensed Bluetooth products, subsystems, components and development tools. The products listed in the QPL are specifically authorized by Bluetooth Certification Groups (BQBs) distributed around the world. Any BQB can evaluate, certify, and list any product that is certified. Joining BQB early can minimize the time and cost of product development.
The Bluetooth product certification policy, the documentation in the PRD, was developed by the Bluetooth Certification Evaluation Board (BQRB), which was elected by representatives of the sponsoring companies from nine Bluetooth SIGs. The authentication program is under the responsibility of a Bluetooth Certified Administrator (BQA) who represents the interests of the BQRB.
BQRB recognizes individual Bluetooth Certification Groups (BQBs) and authorizes them to certify and list products. BQRB also recognizes those certified Bluetooth Certified Test Equipment (BQTFs) as an effective implementation and reporting of Type A test results (see the certification process description for more detailed information). BQRB also recognizes Bluetooth technology appraisers who can value and recommend BQTF candidates.
The Bluetooth Qualification Group (BQB) is a group authorized by BQRB to provide services to members requiring Bluetooth product certification. Members receive certification services directly through BQB. The BQB is responsible for checking declarations and documents that do not conform to the specifications, evaluating product test reports, and listing products in the official library of Bluetooth-licensed products. The BQB must be a Bluetooth SIG member or an employee of the Bluetooth SIG. BQB is an independent entity and does not need to be affiliated with the testing organization and manufacturer.
The BQB certification mark is:
testing agency
The Bluetooth Authentication Testing Authority (BQTF) is officially recognized by the BQRB and can complete the "Class A" Bluetooth authentication conformance test identification in the Test Instance Reference List (TCRL). The authoritative description of the BQTF role is described in Section 4.3.3 of the Bluetooth Authentication Program Reference Document (PRD). Members can use BQTF directly for testing services. In general, BQTF can also provide additional Bluetooth testing services.
Capability range
1, RF conformance testing, including RF, baseband and physical test specifications.
2. Protocol and profile conformance testing, including baseband, link management, L2CAP, and profile conformance testing specifications.
The BQTF conformance test capability can refer to the test case status and capabilities page. For information on BQTF certification processing and standards, refer to the BQTF applicant page.
Qualification authorization
The task of the Bluetooth Technical Assessor (BTA) is to represent the Bluetooth Certification Evaluation Board (BQRB) in the technical competence of the testing organization appointed as Bluetooth Certification Test Equipment (BQTF) for Bluetooth compliance testing and later authorized by the Bluetooth SIG Corporation. Evaluation.
Test Case
This Test Case Status & Capabilities page includes test case descriptions and categories, BQTF test capabilities and validated test equipment capabilities. The official TCRL spreadsheet
File takes precedence over this Test Case Status table in the event of any discrepancy between them.
test
The Designated Section Interoperability Test (DPIT) is useful for product interoperability testing. This page describes the processes selected by the DPITs, including the Pre-PIT stage;
It also describes how and when to use PrePITs and DPITs when conducting cross-examination tests. This page explains and supplements Section 5.4.4 of the PRD.
The existing PITs are as follows:
Pre-PIT list
• DPIT list
DPIT screening:
The DPIT screening is divided into three phases: the BQB evaluation and Pre-PIT list phase, the PrePIT evaluation phase, and the final BQRB evaluation and decision phase.
In the first phase, members need to join BQB to assess whether their certified products meet PrePIT's requirements. When all standards are qualified, BQB classifies this product as Pre-PIT.
In the second phase, the listed Pre-PITs will be tested using tools provided by Bluetooth SIG members. Members are invited to evaluate the listed Pre-PIT and will submit positive or negative feedback to BQRB via BQA.
Next is the evaluation phase. BQRB will review the list, test results and feedback information and consider whether to designate the product as DPIT.
Pre-PIT eligibility may also be cancelled at the time of membership request or BQRB final review.
Pre-PIT standard
The following lists the minimum standard conditions that BQB must have before pre-pit certification.
• The product has at least one Bluetooth profile that complies with the Bluetooth specification 1.0 or newer specifications and the corresponding interoperability tests.
• The product must meet the final supported PRE-PIT profiles and roles listed.
• The product may not include a profile that originally had, but has been rejected, for certification.
• The adaptability of the application to identify the specified character and profile for testing, where the "B" test has satisfied the proposed PRE-PIT,
This PRE-PIT is concluded through the BQB's certification of successful tests and subsequent evaluations of other indicated products.
• The steps performed during the test must be different from those provided by the Pre-PIT applicant.
• The profile of the profile and profile user documentation provided by the applicant must meet pre-pit standards.
• The product has diversity for the DPIT pool; for example, it includes different Bluetooth components than the existing DPIT requires to achieve the target profile.
• Products must ensure that members, BQBs, and BQTFs can be purchased through legitimate commercial channels within 60 days.
• All members of the product must be listed when the member and the BQB order the product.
In addition, it is recommended that membership be added to the nearest UPF institution on behalf of the application vendor.
Prior to the certification of a PRE-PIT, the BQB may ask the member for technical information on the product when evaluating the product.
All test reports and feedback on PRE-PIT must be submitted to BQB for review by BQRB.
Member list
Members may request that BQB indicate a qualified product for conducting a pre-profile cross-cutting interaction test ("PRE-PIT") for a specific profile under the guidelines described in this section. The products listed as pre-pit in the BQB statement meet all the PRE-PIT standards. Each PRE-PIT list must include the following:
• Supported profiles and assigned profiles for each profile (eg, client, server, etc.)
• PICS (differentially enforced and optional implementation features) for each profile.
• Each profile and profile specified role that meets "B" test conditions.
• Documentation for PIT (with each section and character attached).
• The listed products must pass the "B" test.
• It must be clearly stated that the implementation in the test process is different from the application of DPIT.
• Must include specific terms and contact information for obtaining PRE-PIT for review.
Pre-PIT assessment
Test members should submit at least one product to the Bluetooth SIG for the Pre-PIT test requirements listed below. As part of the test evaluation, the Bluetooth SIG will use the testing tool specified by the organization to test this product, and the testing process is free to members. After the assessment is completed, the tested product will be returned to the member.
Members are encouraged but not required to test the listed PRE-PIT. After listing PRE-PITs, BQA informs BTAB and BQRB of this list, and requests all BQB reports to record all information about the transfer of PRE-PIT to DPIT for the next four weeks. For example, record the full reason that it can obtain PRE-PIT.
BQRB Screening DPIT
After the evaluation phase, BQRB must refer to all PRE-PIT reports. The BQRB may decide to: a. approve the DPIT; b. evaluate open surveys that are publicly noticed; c. cancel the PRE-PIT eligibility of the product. BQA will immediately update the product's eligibility status.
Regarding the update of Pre-PIT to DPIT status, if the product does not add effective value or other factors to DPIT, whether the product meets DPIT test standards, etc.
BQRB has the veto to retain this product.
maintain
How to maintain DPIT status:
• Products must maintain consistency with the agreement and profile specifications, including changes introduced by TCRL updates.
The failure of the evaluation will cancel the DPIT qualification that has passed the test unit in the DPIT. If the product supports multiple profiles, one or more profiles do not match,
Only those sections that match each other will be approved by DPIT.
• The product must have the certification conditions required by the profile test indicated by DPIT.
• The product continues to provide valid values for DPIT.
Products that do not meet the requirements can be rejected by BQRB without notice and disqualified from the DPIT certification list.
Products that are deemed to no longer provide valid values for the DPIT pool can be disqualified by public notice within one month after the BQRB veto.
Section Interoperability Testing Requirements:
Due to the different DPIT profiles available, interoperability testing requirements can also vary.
Cross-interaction test using engineering profile:
Section testing must be tested using the principle of engineering-based section interoperability:
• The test forensics citation sheet supports Class B profile interoperability testing, and at least even 2 DPITs support this profile.
Members will provide a form of engineering certification as determined by the BQB that supports the profile interoperability requirements. These proofs come from cross-section interoperability tests and may also include trajectory or software design flows.
In addition to providing engineering certification, members are also encouraged to test the interoperability of listed products.
Section Interoperability Testing with DPITs:
Product-to-product "interoperability testing (B-type testing) must support Bluetooth profiles for all applications.
Under the guidance of BQB, members chose to test interoperable DPITs in order to increase their optional capabilities as much as possible. In each application profile listing multiple DPITs, the product must pass at least two DPIT tests. If a member implements any of the optional features of the Bluetooth system specification, and at least one DPIT can perform related interoperability tests, this functional interoperability test can be completed. A test report detailing the pros and cons of the product must be supplied to the BQB prior to listing the list.
When using DPIT for profile interoperability testing:
• Type B profile interoperability testing exists in the test case reference list. After two certified DPITs exist in a particular profile,
• According to DPIT test requirements, it is only available 90 days after the second DPIT certification.
On the contrary, according to the DPIT, failure of the cross-exchange operation cannot prove that the product does not comply with the Bluetooth system specification. Of course, members are required to give their own certification documents in a different way, including a reasonable explanation of the failure of cross-operation interaction using DPIT. Members are not required to prove that DPIT is not compliant.
Bluetooth specification
Unlike other wireless standards, the Bluetooth wireless specification includes the definition of the link layer and application layer to provide developers with applications supporting data, voice, and directory centers. The Bluetooth wireless specification radio operates in the unlicensed 2.4 GHz band, ensuring global communications compatibility. Use spread spectrum, frequency hopping technology to transmit signals at 1600 hops/s full duplex. The frequency band is divided into 79 channels according to a bandwidth of 1 MHz, and data transmission is performed on 79 channels through random frequency hopping to provide stronger anti-interference performance. Up to 7 connections can be established and maintained at the same time.
The Bluetooth specification ensures that devices supporting Bluetooth wireless technology worldwide can communicate with each other.
Does not promise copyright notice
The copyrights of these specifications are owned by Bluetooth SIG organization promotion members. The use rights of these specifications and any associated intellectual property rights are adopted by the Bluetooth Group and its Promoting Member's Promoting Member Agreement and adopted by the Bluetooth SIG organization and its originating and cooperating members, non-Bluetooth SIG initiating members, and the Promoting Members’ early Bluetooth specification. agreement. The promotion of members' rights and obligations as stipulated in the early sponsors agreement has been promoted to the Bluetooth SIG organization.
Any member who is not a member of the Bluetooth SIG or an early sponsor bans the use of this specification. Member agreements, early sponsor agreements, and facilitator agreements set out the legal rights and obligations of members. This prohibits intellectual property rights from unauthorized, explicit or implicit violations. If the use of the specification violates a member agreement, an early sponsor agreement, or a promoter agreement will be banned, these prohibitions will result in legal liability for the aforementioned agreement and other available agreements or the Bluetooth SIG organization or other members' patent rights and registered trademarks. Infringement of obligations.
THE SPECIFICATION IS PROVIDED ''AS IS'' WITH NO WARRANTIES WHATSOEVER, INCLUDING ANY WARRANTY OF MERCHANTABILITY, NONINFRINGEMENT, FITNESS FOR ANY PARTICULAR PURPOSE, SATISFACTORY QUALITY, OR REASONABLE SKILL OR CARE, OR ANY WARRANTY ARISING OUT OF ANY COURSE OF DEALING, USAGE , TRADE PRACTICE, PROPOSAL, SPECIFICATION OR SAMPLE.
As a result, each member must recognize that products using Bluetooth technology must comply with various laws and regulations of governments around the world. These laws will affect the composition, operation, use, implementation, and distribution of Bluetooth products. These laws stipulate that it is not limited to airline control, telecommunications regulations, technology transfer control, and health and safety rules. In order to obtain the required certifications, licenses, and licenses of products in certain fields within the license rights they possess, each member must independently assume the responsibility of the legal rules of their own Bluetooth products. Each member must know that the specification does not provide any information on safety licenses, certifications, etc.
NOTHING IN THE SPECIFICATION CREATES ANY WARRANTIES, EITHER EXPRESS OR IMPLIED, REGARDING SUCH LAWS OR REGULATIONS. ALL LIABILITY, INCLUDING LIABILITY FOR INFRINGEMENT OF ANY INTELLECTUAL PROPERTY RIGHTS OR FOR NONCOMPLIANCE WITH LAWS, RELATING TO USE OF THE SPECIFICATION IS EXPRESSLY DISCLAIMED. BY USE OF THE SPECIFICATION, EACH MEMBER EXPRESSLY WAIVES ANY CLAIM AGAINST BLUETOOTH SIG AND ITS PROMOTER MEMBERS RELATED TO USE OF THE SPECIFICATION.
After the release of the specification, the Bluetooth SIG organization reserves the right to modify specifications and add new Bluetooth profiles where necessary or appropriate.
Bluetooth system specification:
Core Specification 1.2
The Bluetooth 1.2 core specification (10M zip) is designed for developers. It provides developers with more user experience to fully prepare for the future development of the wireless field. The specification includes more than 1,000 products ranging from mice and mobile phones to automobiles and various computing products. Version 1.2 not only backwards compatible with these products, but also tried to develop more mainstream products such as mobile phones, headsets, PDAs, MP3s, cameras and laptops in personal area networks.
Core Specification 2.0
The Bluetooth 2.0 core specification is a common version of the Bluetooth product on the market. It extends the Bluetooth wireless transmission distance and extends it to an effective transmission range of 10 meters.
In the application of mobile phones, Bluetooth 2.0 can support the wireless listening of mobile music when there is proper program cooperation, enabling you to use bluetooth to extract the music stored in the Bluetooth-equipped mobile phone.
Core Specification 2.1
The Bluetooth 2.1 core specification is the latest Bluetooth version of the current product. It can support simultaneous connection with two wireless Bluetooth devices, similar to the dual standby function, but it can only support the connection of a Bluetooth device.
Core Specification 3.0
At the heart of Bluetooth 3.0 is "Generic Alternate MAC/PHY" (AMP), a new alternative RF technology that allows the Bluetooth protocol stack to dynamically select the correct radio for any task. Technologies that were initially expected to be used in the new specification include 802.11 and UMB, but the UMB application was removed from the new specification. As a new version of the specification, the transmission speed of Bluetooth 3.0 will naturally be higher, and the secret is on the 802.11 wireless protocol. By integrating "802.11 PAL" (Protocol Adaptation Layer), the data rate of Bluetooth 3.0 is increased to approximately 24Mbps (ie, 802.11 WI-FI can be called for high-speed data transmission when needed). , is eight times the Bluetooth 2.0, can be easily used for video recorders to HDTV, PC to PMP, UMPC to printer data transfer. In terms of power consumption, the high-speed transmission of large amounts of data via Bluetooth 3.0 naturally consumes more energy. However, due to the introduction of the Enhanced Power Control (EPC) mechanism, supplemented by 802.11, the actual idle power consumption will be significantly reduced and the standby power consumption of Bluetooth devices will be reduced. It is hopeful to get a preliminary solution. In fact, the Bluetooth Alliance is also working on a low-power version of the new specification. In addition, the new specification also has two technologies, General Test Method (GTM) and One-Way Broadcast Connectionless Data (UCD), and includes a set of HCI commands to obtain the key length. According to reports, a PC equipped with a Bluetooth 2.1 module can theoretically allow Bluetooth 2.1 devices to also support Bluetooth 3.0 by upgrading firmware. Alliance members have already started developing Bluetooth 3.0 solutions for device manufacturers.
Core Specification 4.0
Bluetooth 4.0 includes three sub-specifications, namely traditional Bluetooth technology, high-speed Bluetooth, and new Bluetooth low-power technology. The improvement of Bluetooth 4.0 is mainly reflected in three aspects: battery life, energy saving, and device types. Low-cost, inter-vendor interoperability, low latency of 3 milliseconds, ultra-long distance of 100 meters, AES-128 encryption, etc. In addition, the effective transmission distance of Bluetooth 4.0 has also been improved. Currently, the effective transmission distance of Bluetooth is 10 meters (about 30 feet), while the effective transmission distance of Bluetooth 4.0 can reach 100 meters (about 200 feet). SIG said that the complete specification of Bluetooth 4.0 will be completed on June 30th, 2012, while devices based on Bluetooth 4.0 are expected to be available by the end of the year or early 2011.
Core specifications
1.1 Core Specification (7MB)
1.0 Core Specification (7MB)
Sections and protocols:
Test and certification:
Test Specification
ICS and PIXIT forms
Test Case Reference List
Certification Plan Document
Bluetooth v1.2
Bluetooth 1.2 system specification, 2003.11.5 adopted, including four volumes:
Volume 0 - home directory for content and consistency requirements
Volume 1 - List of schemas and terms
Volume 2 - Core System Grouping [Controller]
Volume 3 - Core System Package [Host]
Volume 2 details the radio frequency, baseband, connection manager, and host controller interfaces. Volume 3 provides detailed descriptions of link level control and adaptation protocols, service discovery agreements, generic access agreements, and test control interfaces.
Bluetooth 1.1
The Bluetooth specification includes Bluetooth radio specifications, baseband, link manager, L2CAP, service discovery, RFCOMM, IrDA, and other core specifications.
The appendix includes amendments to Part I:2, conformance requirements.
The published erroneous table service 1, adopted in 2003.3.40 (Version 1.02, published on 2003.8.25), includes the system specification v1.1 error table.
Bluetooth v1.1
The second volume of the Bluetooth Specification provides a detailed description of the Bluetooth-enabled application profile. These specifications contain the following sections:
Universal access, service discovery applications, cordless phones, internal communications, serial ports, headsets, dial-up networking, fax, LAN, general purpose object exchange, object push, file transfer, synchronization.
Allocation number
This website provides a complete list of the currently assigned device numbers available.
Bluetooth additional profile specification:
After the v1.1 specification was adopted, an additional set of Bluetooth profiles and application profile specifications was introduced. The 6.4M compression package (above) contains the latest versions of these protocol and application profile specifications:
protocol
Audio Control Transmission Protocol (AVCTP) V0.95a
Audio Control Transmission Protocol (AVCTP) v1.0
Audio Distributed Transmission Protocol (AVDTP) V0.95b
Audio Distributed Distribution Protocol (AVDTP) V1.0
Bluetooth Network Encapsulation Agreement (BNEP) V0.95a
Bluetooth Network Encapsulation Agreement (BNEP) V1.0
profile
Advanced Audio Distributed Profile (A2DP) V0.95b
Advanced Audio Distributed Profile (A2DP) V1.0
Audio Video Remote Control Profile (AVRCP) V0.95b
Audio Video Remote Control Profile (AVRCP) V1.0
Audio Video Distribution Profile (AVVDP) V0.95 rc7
Basic Imaging Profile (BIP) V0.95c
Basic Imaging Profile (BIP) v1.0
Basic Print Profile (BPP) V0.95a
Public ISDN Access Profile (CIP) V0.95
Public ISDN Access Profile (CIP) V1.0
Extended Service Discovery Profile (ESDP) V0.95a
Universal Audio Video Distributed Profile (GAVDP) V0.95b
Universal Audio and Video Distributed Profile (GAVDP) V1.0
Hands-free profile (HFP) V0.96
Handsfree Profile (HFP) V1.0m
Hard copy cable replacement profile (HCRP) V0.95a
Hard copy cable replacement profile (HCRP) V1.0a
Human Interface Device Profile (HID) V0.95c
Human Interface Device Profile (HID) V1.0
Personal Area Network Profile (PAN) V0.95a
Personal Area Network Profile (PAN) V1.0
Organization Overview
The sponsors of the Bluetooth SIG include leading companies such as Agere, Ericsson, IBM, Intel, Microsoft, Motorola, Nokia, and Toshiba in the fields of communications, software, and computers, as well as hundreds of companies in various fields.
all members
In the beginning, the operation of the Bluetooth SIG organization depended on only a few staff members to maintain one. More often than not, employees of SIG member companies spontaneously organized an unpaid work unit to complete the work of the SIG. The SIG organization’s human resources situation was Improved. In July 2002, the Bluetooth SIG organized its global management headquarters in Overland Park, Kansas. The staff includes executive director Mike McCamon, as well as a few managers in the marketing department and technical engineers in the engineering department.
Member source
In addition to the Bluetooth SIG organization's own staff, volunteers from SIG member companies play an important role in the work and services of the Bluetooth SIG organization. These voluntary work formed most of the work departments, which are mainly engaged in professional fields such as technical engineering department, quality inspection department and market operation department. Today, SIG's member companies, as members of the working group, are also committed to product development and certification. The SIG product organization structure also provides a formal work department that specializes in assisting companies to develop products for testing and certification.
---------------------------------------------------------------------------------------------
簡言之就是,如果您的產品具有藍牙功能並且在產品外觀上標明藍牙標誌,必須通過一個叫做BQB的認證。藍牙認證也就是BQB認證藍牙認證是任何使用藍牙無線技術的產品所必須經過的證明程式 。藍牙系統規範中定義的藍牙無線技術允許設備間的短距離無線資料連接。藍牙認證程式參考文檔是產品認證過程的標準參考。藍牙特別興趣組織成員具有特許免費權利在藍牙認證產品清單(QPL)的產品清單中使用藍牙無線技術。藍牙SIG成員是免費的。
藍牙QPL列出了所有得到許可的藍牙成品,子系統,元件和開發工具。在QPL中列出的產品是由分佈在世界各地的藍牙認證團體(BQBs)特別授權的。任何BQB都可以評估,認證,和列出認證的任何產品。及早加入BQB,可使產品開發的時間和費用最小化。
藍牙產品認證方針,在PRD中的文檔,是由藍牙認證評估委員會(BQRB)制定的,該委員會由來自9個藍牙SIG的發起企業的代表選舉產生。認證程式由代表BQRB利益的藍牙認證管理員(BQA)負責。
BQRB 認可個別的藍牙認證團體(BQBs),授權給他們去認證和列出產品。BQRB也認可那些經過鑒定合格的藍牙認證測試設備(BQTFs),作為有效的執行和報告A類測試結果(參見認證過程描述獲得更詳細的資訊)。BQRB同樣也認可藍牙技術估價員,由他們來估價和推薦BQTF候選人。
藍牙認證團體(BQB)是由BQRB授權的,為需要獲得藍牙產品認證的成員提供服務的團體。成員直接通過BQB獲得認證服務。BQB負責檢查不符合規範的聲明和文檔,評價產品測試報告,在藍牙授權產品的官方資料庫中列出產品。BQB必須是藍牙SIG成員或者藍牙SIG的雇員。BQB是獨立的個體,不需要附屬於測試機構和生產商。
BQB認證標識為:
測試機構
藍牙認證測試機構(BQTF)是經過BQRB正式認可的,能完成測試實例引用清單(TCRL)中的“A類”藍牙認證一致性測試鑒別。BQTF角色的權威描述在藍牙認證程式參考文檔(PRD)中4.3.3一節。成員可以直接將BQTF用於測試服務。通常,BQTF也可以提供額外的藍牙測試服務。
能力範圍
1、射頻一致性測試,包括RF,基帶和物理測試規範。
2、協議和剖面一致性測試,包括基帶,鏈路管理,L2CAP和剖面一致性測試規範。
BQTF一致性測試能力可以參考測試實例狀態與能力一頁。有關BQTF認證處理和標準的資訊可以參考BQTF申請者一頁。
資質授權
藍牙技術評估員(BTA)的任務是代表藍牙認證評估委員會(BQRB),對委派用於藍牙一致性測試及後期由藍牙SIG公司授權的作為藍牙認證測試設備(BQTF)的測試機構的技術能力進行評估。
測試案例
this Test Case Status & Capabilities page includes test case descriptions and categories, BQTF test capabilities and validated test equipment capabilities. The official TCRL spreadsheet
file takes precedence over this Test Case Status table in the event of any discrepancy between them.
測試
指定剖面互通性測試(DPIT)對於產品互通性測試非常有用。本頁描述DPITs選用的處理,包括Pre-PIT階段;
同時也描述在執行交交互操作測試時,在什麼樣的情況下如何使用PrePITs和DPITs。本頁闡明並補充了PRD的5.4.4節。
現有的PITs如下:
Pre-PIT列表
• DPIT列表
DPIT篩選:
DPIT篩選分為3個階段:即BQB評價和Pre-PIT列表階段、PrePIT評估階段和最後的BQRB評價和決斷階段。
第一個階段,成員需要加入BQB以評估他們的認證產品是否符合PrePIT的要求。當所有標準都合格,BQB將此產品列為Pre-PIT。
第二階段,所列的Pre-PIT將使用由藍牙SIG成員提供的工具進行測試。成員被邀請評估所列的Pre-PIT,將通過BQA向BQRB提交肯定或者否定的回饋資訊。
接下來是評估階段,BQRB將複查列表、測試結果和回饋資訊,並考慮是否指定該產品為DPIT。
在成員請求或BQRB最終複查的時候,Pre-PIT資格也可能會被取消。
Pre-PIT標準
下面列出BQB在評估階段認證pre-pit必須具備的最低標準條件。
• 產品至少具有一個藍牙剖面,符合藍牙1.0規範或者更新的規範以及相應的互通性測試。
• 產品必須符合所列出的最終支援的PRE-PIT剖面和角色。
• 產品可以不用包含原先具有的但已放棄的申請認證資格的剖面。
• 應用鑒別指定的角色和剖面進行測試的適應性,其中“B”類測試已經滿足了所提議的PRE-PIT,
這個PRE-PIT是經過BQB對其他指出產品的成功測試和後來估價所認證而得出的結論。
• 在測試過程中執行的步驟必須與Pre-PIT申請者提供的測試步驟不同。
• 申請者提供的剖面和剖面角色的用戶文檔必須符合pre-pit的標準要求。
• 產品對於DPIT池就有多樣性;例如包括比現存的DPIT實現目標剖面所要求的藍牙元件有所不同。
• 產品必須保證成員、BQB和BQTF能在60天內,通過正當的商業途徑可以購買得到。
• 在成員和BQB定購產品時必須列出產品所有用到的元器件。
此外,建議成員身份代表應用廠商加入到最近的UPF機構。
認證一個PRE-PIT之前,在評估產品時BQB可以向成員索要產品的技術資料。
有關PRE-PIT的所有測試報告和回饋資訊,必須提交給BQB以備BQRB複查。
成員列表
成員可以要求BQB指出一件合格的產品,用於在本節描述的準則下,特定的剖面進行一個預先剖面的交交互操作測試(“PRE-PIT”)。BQB 聲明列出的作為pre-pit的產品滿足所有的PRE-PIT標準。每個PRE-PIT清單必須包括以下內容:
• 所支持的剖面和各個剖面指定的角色(例如:客戶機,伺服器,等)
• 各個剖面的PICS(鑒別強制的和可選的實現特徵)。
• 各個滿足“B”類測試條件的剖面和剖面指定的角色。
• 用於PIT的文檔(附蓋了每個剖面和角色)。
• 所列出的產品必須通過“B”類測試。
• 必須明確指出在測試過程中的實現方式不同於DPIT的應用方式。
• 必須包括獲得PRE-PIT以備複查的具體條款和公司聯繫方式。
Pre-PIT評估
測試成員應當向Bluetooth SIG至少提交一個產品用於下面列出的Pre-PIT測試要求。作為測試評估的一部份,Bluetooth SIG將使用機構所指定的測試工具對這個產品進行測試,並且測試過程對成員是免費的。評估完成成後,被測試的產品將返回給成員。
鼓勵但不要求成員測試所羅列的PRE-PIT。在列出PRE-PIT之後,BQA將這個列表告知BTAB和BQRB,並要求所有的BQB報告記載下四個星期來關於PRE-PIT轉入DPIT的所有資訊。例如,記錄下其能獲得PRE-PIT的充分理由。
BQRB篩選DPIT
評估階段之後,BQRB必須參考所有的PRE-PIT報告。BQRB可以決定:a.批准DPIT;b.評估公開被關注的未決調查報告;c.取消產品的PRE-PIT資格。BQA將立即更新產品的資格狀態。
關於Pre-PIT到DPIT狀態的更新,如果產品沒有向DPIT增加有效值或者其他的因素,產品是否符合DPIT測試標準等情況,
BQRB具有保留該此產品的否決權。
維護
如何維持DPIT狀態:
• 產品必須保持與協定和剖面規範的一致性,包括TCRL更新所引入的變動。
評估的失敗將取消在DPIT中已經通過測試單元的DPIT資格。如果產品支援多個剖面,其中一個或者多個剖面不匹配,
只有那些互相匹配的剖面會被DPIT認可。
• 產品必須具備DPIT指出的剖面測試所要求的認證條件。
• 產品繼續給DPIT提供有效值。
不符合要求的產品可以不公告就被BQRB否決,並從DPIT認證列表取消掉資格。
被認為不再為DPIT池提供有效值的產品,可以被BQRB否決後的一個月內公示取消其資格。
剖面互通性測試需求:
由於可用的DPIT剖面不同,互通性測試要求也可以有所不同。
利用工程學規範剖面所進行的交交互操作測試:
剖面測試必須用基於工程學的剖面互通性原則進行測試:
• 測試舉證引用表要支援B類剖面互通性測試,並且至少偶2個DPIT支援這個剖面。
成員將提供一個由BQB確定的形式的工程學證明,它支持剖面互通性要求。這些證明是來源於剖面互通性測試的也可能包括軌跡或軟體設計流程。
除提供工程學證明之外,還鼓勵成員對於列出產品的互通性進行測試。
用DPITs的剖面互通性測試:
產品對產品“互通性測試(B類測試) 必須能支持所有應用的藍牙剖面。
在BQB指導下,成員選擇對互通性的DPITs進行測試,是為了儘量的增加其可選功能的覆蓋能力。在每個列出多個DPITs的應用剖面中,產品必須至少通過2個DPIT測試。如果成員實現了藍牙系統規範的任一部分可選功能,並且至少一個DPIT能夠執行相關的互通性測試,則這個功能性的互通性測試就能夠完成。一個詳細描述產品優缺點的測試報告必須在列出列表前提供給BQB。
在利用DPIT進行剖面互通性測試時會出現:
• B類剖面互通性測試存在於測試用例引用列表中,特定剖面存在2個認證了的DPIT後,
• 根據DPIT的測試要求,只有在第二次DPIT認證之後的90天后才可用。
反之,根據DPIT的指出,交交互操作失敗不能證明產品不符合藍牙系統規範。當然,要求成員以別的方式給出其符合規範的證明文檔,包括利用DPIT的交交互操作失敗的合理解釋。不要求成員證明DPIT是不符合規範的。
藍牙規範
不像其他的無線標準,藍牙無線規範包括鏈路層和應用層的定義,為開發者提供支援資料、語音和目錄中心的應用。藍牙無線規範的無線射頻工作在免執照的2.4GHz的頻帶上,保證了全球通訊的相容性。利用擴譜、跳頻技術,以1600跳/s全雙工的傳輸信號。按照1MHz的頻寬將頻帶劃分成79個頻道,在79個通道上通過隨機跳頻傳輸資料,提供更強的抗幹擾性。最多可以同時建立和維持7個連接。
藍牙規範確保了全球支援藍牙無線技術的設備之間可以互相通訊。
不承諾版權公告
這些規範的版權歸藍牙SIG組織促進成員所有。這些規範的使用權和任何相關的智慧財產權都由藍牙組織和其促進成員的促進成員協定以及藍牙SIG組織和他的發起和合作成員、非藍牙SIG發起成員和促進成員的早期藍牙規範所採納的協定。早期發起者協議中規定的促進成員權利和義務已經被促進成員帶入藍牙SIG組織。
任何不屬於藍牙SIG的成員或者早期的發起者禁止使用該規範。成員協定、早期發起者協定和促進者協定規定了成員的法律權力和義務。這裡禁止對智慧財產權不經許可的,明確或者隱晦的侵犯。如果規範的使用違反了成員協議、早期的發起者協定或者促進者協定都將被禁止,這些禁止將導致對上述協定和其他可用協定或者藍牙SIG組織的法律責任或者其他成員的專利版權和注冊商標義務的侵犯。
THE SPECIFICATION IS PROVIDED ''AS IS'' WITH NO WARRANTIES WHATSOEVER, INCLUDING ANY WARRANTY OF MERCHANTABILITY, NONINFRINGEMENT, FITNESS FOR ANY PARTICULAR PURPOSE, SATISFACTORY QUALITY, OR REASONABLE SKILL OR CARE, OR ANY WARRANTY ARISING OUT OF ANY COURSE OF DEALING, USAGE, TRADE PRACTICE, PROPOSAL, SPECIFICATION OR SAMPLE.
由此每個成員必須認識到應用藍牙技術的產品要順應各種法律和世界各地政府的調控。這些法律將影響藍牙產品的組成,操作,使用,實現和分發。這些法律規定,不僅僅限於航線調控,電訊規章 ,技術轉讓控制和健康安全規則。在他們擁有的許可權內為了獲取產品在某些領域所需要的認證,執照和許可證,每個成員必須獨立承擔他們自己的藍牙產品的法律規則的責任。每個成員必須知道規範不提供任何有關安全許可證、認證等方面的資訊。
NOTHING IN THE SPECIFICATION CREATES ANY WARRANTIES, EITHER EXPRESS OR IMPLIED, REGARDING SUCH LAWS OR REGULATIONS. ALL LIABILITY, INCLUDING LIABILITY FOR INFRINGEMENT OF ANY INTELLECTUAL PROPERTY RIGHTS OR FOR NONCOMPLIANCE WITH LAWS, RELATING TO USE OF THE SPECIFICATION IS EXPRESSLY DISCLAIMED. BY USE OF THE SPECIFICATION, EACH MEMBER EXPRESSLY WAIVES ANY CLAIM AGAINST BLUETOOTH SIG AND ITS PROMOTER MEMBERS RELATED TO USE OF THE SPECIFICATION.
在規範發佈後藍牙SIG組織保留在必要或者合適的地方對規範的的修改和增加新藍牙剖面的權力。
藍牙系統規範:
核心規範1.2
藍牙1.2核心規範(10M的zip)為開發者設計。它為開發者提供了更多的用戶使用經驗為未來無線領域的發展作了充分的準備。規範的包括了1000多種產品,從滑鼠、手機到汽車和各種計算產品。1.2版不僅向後相容這些產品,而且試圖開發更多的主流產品例如用於個域網內的手機、耳機、PDA、MP3、照相機和膝上電腦。
核心規範2.0
藍牙2.0核心規範是市場上常見的藍牙產品的版本。它擴大了藍牙無線傳輸的距離,將其擴展至10米的有效傳輸範圍。
在手機的應用上,當有恰當的程式配合時,藍牙2.0版本能夠支援手機音樂的無線接聽,使你能夠用藍牙提取配對具藍牙功能的手機裡存儲的音樂。
核心規範2.1
藍牙2.1核心規範是當期產品化最新的藍牙版本。它能夠支援與兩台無線藍牙設備同時連接,類似於雙待功能,但是它只能支援一支藍牙設備的通話連接。
核心規範3.0
藍牙3.0的核心是"Generic Alternate MAC/PHY"(AMP),這是一種全新的交替射頻技術,允許藍牙協議棧針對任一任務動態地選擇正確射頻。最初被期望用於新規範的技術包括802.11以及UMB,但是新規範中取消了UMB的應用。 作為新版規範,藍牙3.0的傳送速率自然會更高,而秘密就在802.11無線協議上。通過集成"802.11 PAL"(協議適應層),藍牙3.0的資料傳輸率提高到了大約24Mbps(即可在需要的時候調用802.11 WI-FI用於實現高速資料傳輸)。,是藍牙2.0的八倍,可以輕鬆用於錄影機至高清電視、PC至PMP、UMPC至印表機之間的資料傳輸。 功耗方面,通過藍牙3.0高速傳送大量資料自然會消耗更多能量,但由於引入了增強電源控制(EPC)機制,再輔以802.11,實際空閒功耗會明顯降低,藍牙設備的待機耗電問題有望得到初步解決。事實上,藍牙聯盟也正在著手制定新規範的低功耗版本。 此外,新的規範還具備通用測試方法(GTM)和單向廣播無連接資料(UCD)兩項技術,並且包括了一組HCI指令以獲取金鑰長度。 據稱,配備了藍牙2.1模組的PC理論上可以通過升級固件讓藍牙2.1設備也支援藍牙3.0。聯盟成員已經開始為設備製造商研發藍牙3.0解決方案。
核心規範4.0
藍牙4.0包括三個子規範,即傳統藍牙技術、高速藍 牙和新的藍牙低功耗技術。藍牙 4.0的改進之處主要體現在三個方面,電池續航時間、節能和設備種類上。 擁有低成本,跨廠商互通性,3毫秒低延遲、100米以上超長距離、AES-128加密等諸多特色 此外,藍牙4.0的有效傳輸距離也有所提升。當前,藍牙的有效傳輸距離為10米(約 30英尺),而藍牙4.0的有效傳輸距離可達到100米(約200英尺)。 SIG表示,藍牙4.0完整規範將於2012年6月30日完成,而基於藍牙4.0的設備有望於年底或2011年初上市。
核心規範
1.1核心規範(7MB)
1.0核心規範(7MB)
剖面和協議:
測試和認證:
測試規範
ICS和PIXIT形式
測試用例參考列表
認證計畫文檔
藍牙v1.2
藍牙1.2系統規範,2003.11.5採納,包括四卷:
卷0-內容和一致性需求的主目錄
卷1-架構和術語列表
卷2-核心系統分組[控制器]
卷3-核心系統包[主機]
卷2中對射頻,基帶,連線管理員和主控制器介面進行了詳細說明。卷3中對連路層控制和適配協定,服務發現協定,通用接入協定和測試控制介面進行詳細說明。
藍牙1.1
本卷藍牙規範包含了藍牙射頻規範、基帶、鏈路管理器、L2CAP、 服務發現、RFCOMM、 IrDA 和其他核心規範。
附錄包括對Part I:2的修正,一致性需求。
發佈的正誤表服務1,於2003.4.30採納(1.02版,發佈於2003.8.25),包括系統規範v1.1 正誤表。
藍牙v1.1
藍牙規範第二卷提供了藍牙支援的應用剖面的詳細說明。這些規範包含以下的剖面:
通用接入,服務發現應用,無繩電話,內部通信,串口,耳機,撥號網路,傳真,局域網,通用對象交換,對象push,檔案傳輸,同步.
分配號碼
本網站提供了可用的當前分配設備號碼的完整清單。
藍牙附加剖面規範:
採用了v1.1規範之後,又推出了藍牙協定和應用剖面規範的附加組。6.4M的壓縮包(上面)包含了以下這些協定和應用剖面規範的最新版本:
協議
音訊控制傳輸協議(AVCTP) V0.95a
音訊控制傳輸協議(AVCTP) v1.0
音訊分散式傳輸協議(AVDTP) V0.95b
音訊分散式傳輸協議(AVDTP) V1.0
藍牙網路封裝協定(BNEP) V0.95a
藍牙網路封裝協定(BNEP) V1.0
剖面
高級音訊分散式剖面(A2DP) V0.95b
高級音訊分散式剖面(A2DP) V1.0
音視頻遠端控制剖面 (AVRCP) V0.95b
音視頻遠端控制剖面 (AVRCP) V1.0
音視頻分散式剖面(AVVDP) V0.95 rc7
基本成像剖面 (BIP) V0.95c
基本成像剖面(BIP) v1.0
基本列印剖面 (BPP) V0.95a
公共ISDN接入剖面 (CIP) V0.95
公共ISDN接入剖面(CIP) V1.0
擴展的服務發現剖面 (ESDP) V0.95a
通用音視頻分散式剖面(GAVDP) V0.95b
通用音視頻分散式剖面(GAVDP) V1.0
免提剖面 (HFP) V0.96
免提剖面 (HFP) V1.0m
硬拷貝電纜替代剖面(HCRP) V0.95a
硬拷貝電纜替代剖面(HCRP) V1.0a
人機介面設備剖面(HID) V0.95c
人機介面設備剖面(HID) V1.0
個域網剖面 (PAN) V0.95a
個域網剖面(PAN) V1.0
組織概述
藍牙SIG組織的發起者包括Agere, Ericsson, IBM, Intel, Microsoft, Motorola, Nokia 和 Toshiba等在通訊領域、軟體領域、電腦領域的領先企業,另外還包括幾百家各個領域的公司。
全體成員
一開始,藍牙SIG組織的運作只靠少數的工作人員來維持一,更多的是SIG成員公司的職工們自發組織的一個無償工作部門來完成SIG的工作,SIG組織的人力資源的情況才得到了改善。2002年7月,藍牙SIG組織的全球管理總部在美國堪薩斯Overland Park成立。工作人員包括執行董事Mike McCamon,以及市場部少數管理人員和工程部的技術工程師。
成員來源
除了藍牙SIG組織自己的工作人員,來自SIG成員公司的志願者在藍牙SIG組織的工作和服務中扮演了很重要的角色。這些志願工作組建了大部分工作部門,這些部門主要從事於專業領域,例如技術工程部門,品質檢測部門和市場運營部門等。今天,SIG的成員公司,在作為工作組成員同時,也致力於產品的開發和認證工作。SIG產品組織結構也提供了一個正規的工作部門,專門協助各個公司開發的產品進行測試和認證。