◆ORIGO chứng nhận quốc tế ◆
◆Sanwei International
Certification Ltd◆
Email.:salestw.origo@gmail.com
Chất lượng dịch vụ : Chuyên nghiệp, công bằng và công chính
Thái độ làm việc.: chính trực, nghiêm ngặt, tận tình
ISO 14644 – HỆ THỐNG TIÊU CHUẨN PHÒNG SẠCH
Đối với nhiều hoạt
động sản xuất hoặc nghiên cứu, kiểm soát ô nhiễm là rất quan trọng. Thông qua môi trường phòng sạch (clean
room) quản lý môi trường và kiểm soát quá trình chặt chẽ, để kiểm soát ô nhiễm
dễ dàng hơn. Tiêu chuẩn phòng sạch cho tiêu chuẩn ISO 14644 (ISO 14644 clean
room standards ) này cung cấp một số giải pháp và thủ tục cần thiết cho việc quản
lý rủi ro các nguồn ô nhiễm.
ISO 14644 hỗ trợ
cải tiến quản lý các hạt ô nhiễm trong không khí. Phòng sạch được quy định và
phân loại tốt có tầm quan trọng đặc biệt trong một số ngành sản xuất thực phẩm,
dược phẩm, hàng không và ô tô. Định nghĩa về phòng sạch chỉ đơn giản là "ô
nhiễm không khí khu vực kiểm soát chặt chẽ" Giả sử một nguồn ô nhiễm cho
khu vực này không có kiểm soát ô nhiễm, ô nhiễm đối với quá
trình hoặc sản phẩm rất
có thể sẽ gây ra một thảm họa lớn khó khăn để sửa chữa. Ủy ban kỹ thuật tiêu
chuẩn ISO David Ensor chỉ ra: Sử dụng phòng sạch liên quan đến đại đa số các công
trình kỹ thuật hiện đại cao, do đó, việc thay đổi đối với Ủy ban kỹ thuật có
liên quan là một tác động rộng lớn. Hai phiên bản này chủ yếu giúp nâng cao khả
năng quản lý và định lượng của "hạt không khí".
Loạt các tiêu
chuẩn của ISO 14644, có 2 tiêu chuẩn đã được cập nhật vào năm 2015
Trong loạt các
tiêu chuẩn ISO14644, hai tiêu chuẩn đã được sửa đổi được cập nhật để đối phó với
sự phát triển của các công nghệ mới nhất và đáp ứng nhu cầu thị trường, tương ứng,
phân biệt là ISO 14644-1: 2015 và ISO 14.644-2: 2015.
ISO 14644-1:
2015 phòng sạch và kiểm soát môi trường có liên quan - Part1: phân loại không
khí bằng nồng độ hạt (ISO 14644-1: 2015 Cleanrooms and associated controlled
environments - Part 1: Classification of air cleanliness by particle
concentration)
ISO 14.644-2:
2015 phòng sạch và kiểm soát môi trường có liên quan – Part 2: ghi chép giám sát nồng độ của các hạt
trong không khí, giám sát để kiểm soát không khí sạch sẽ phòng sạch và cung cấp
một khuôn khổ cơ bản cho sự giám sát của phòng sạch và phân cấp. (ISO 14644-2:
2015 Cleanrooms and associated controlled environments -- Part 2: Monitoring to
provide evidence of cleanroom performance related to air cleanliness by
particle concentration)
ISO 14644 hỗ trợ
cải thiện việc quản lý các hạt ô nhiễm trong không khí
Nhiều thành phần
tiêu chuẩn ISO 14644
Phần 1: Phân loại
không khí sạch sẽ Classification of air cleanliness
Phần 2 : Ghi
chép cách giám sát nồng độ của các hạt trong không khí, giám sát phòng sạch đối
với năng lực khống chế nồng độ sạch trong không khí. Specifications for testing
and monitoring to prove continued compliance with ISO 14644-1
Phần 3: Các
phương pháp thử nghiệm Test Methods
Phần 4: Thiết kế,
Xây dựng và Kích hoạt Design, construction and start-up
Phần 5:Vận hành
Operations
Phần 6: Từ vựng
Vocabulary
Phần 7: Tách bộ phận máy, nắp không khí sạch, hộp găng tay, máy phân tách và một môi trường hoạt động mini. Separative devices (clean air hoods, gloveboxes, isolators and minienvironments)
Phần 8: Phân loại nồng độ hóa chất không
khí (ACC) Classification of airborne molecular contamination.
Phần 9: Làm sạch
lớp bề mặt Lớp phân loại nồng độ hạt không khí Classification of surface
particle cleanliness
Phần 10: Độ sạch
bề mặt của việc phân loại hóa học bề mặt Classification of Surface Cleanliness
by Chemical Concentration
---------------------------------------------------------------------------------------------
For many manufacturing or research
activities, pollution control is very important. Through the clean room
environment (clean room) environmental management and strict process control,
so that pollution control easier. This ISO 14644 clean room standards for
cleanrooms provides some solutions as well as the procedures necessary for risk
management of sources of pollution.
ISO 14644
assists in improving management of polluted particles in the air. Clean rooms
that are well regulated and well-graded are of particular importance in some
food manufacturing, pharmaceutical, aerospace and automotive industries. The
definition of a clean room is simply "a highly controlled area of
pollution source in the air." Suppose an area has no real control over a
source of pollution that is likely to cause a catastrophic catastrophe for a
process or product. David Ensor, ISO Standards Council member, points out that
the use of cleanrooms is related to most modern high-tech industries and
therefore, the revision is a widespread challenge for the relevant technical
committee. These two revisions mainly help to improve the quantification and
management capabilities of "airborne particles".
ISO 14644 series
of standards, there are 2 standards have been updated in 2015
Among the
ISO14644 series of standards, 2 standards have been updated and updated to meet
the latest technological developments and to meet the market demand, namely ISO
14644-1: 2015 and ISO 14644-2: 2015 respectively.
ISO 14644-1:
2015 Cleanrooms and related control environments - Part 1: Classification of
airborne particles and their air cleanliness (ISO 14644-1: 2015 Cleanrooms and
associated controlled environments - Part 1: Classification of air cleanliness
by particle concentration)
ISO 14644-2:
2015 Cleanrooms and Related Control Environments - Part 2: Supervise cleanrooms
for air cleanliness through the monitoring of particulates in the air and
provide a basic framework for supervising cleanrooms Grading. (ISO 14644-2:
2015 Cleanrooms and associated controlled environments - Part 2: Monitoring to
provide evidence of cleanroom performance related to air cleanliness by
particle concentration)
ISO 14644
assists in improving management of polluted particles in the air
More ISO 14644
standard family
Part 1:
Classification of air cleanliness Classification of air cleanliness
Part 2:
Supervising the cleanroom's ability to control air cleanliness through the
monitoring of particulates in the air. Specifications for testing and
monitoring to prove continued compliance with ISO 14644-1
Part 3: Test
Methods
Part 4: Design,
Build and Enable Design, construction and start-up
Part 5: Running
Operations
Part 6:
Vocabulary
Part 7:
Separators, Clean Air Hoods, Glove Boxes, Isolators, and Mini-Job Openings Separative
devices (clean air hoods, gloveboxes, isolators and minienvironments)
Part 8: Air
Chemical Concentration Classification (ACC) Classification of airborne
molecular contamination
Part 9: Surface
Particle Cleanliness Classification of Air Particle Concentration
Classification of surface particle cleanliness
Part 10: Surface
cleanliness of the surface chemical classification Classification of Surface
Cleanliness by Chemical Concentration
---------------------------------------------------------------------------------------------
對於許多製造業或研究活動中,污染的控制是非常重要的。透過無塵室(clean room)環境建置以及嚴格流程控管,讓污染控制變得容易。這項關於潔淨室 ISO14644 無塵室標準( ISO 14644 clean room standards)提供一些解決方案以及汙染源風險管理所必需要的程序。
ISO 14644 協助改善對於空氣中汙染粒子的管理能力。受到良好管制並確實分級的無塵室,在一些食品製造業、製藥業、航空工業、汽車工業中格外的重要。潔淨室的定義簡單來說就是「空氣中的汙染源受到高度控制的區域」假設一個區域對於汙染源沒有確實控制,該汙染對於製程或產品將很有可能造成難以修復的大災難。ISO 標準技術委員David Ensor指出:潔淨室的使用關係到大多數的現代高科技產業,因此,改版對於相關技術委員會來說是一個廣泛的衝擊。這兩項改版主要協助改善對於「空氣中汙染粒子」的量化與管理能力。
ISO 14644 系列標準中,有2標準已在2015年進行更新改版
在 ISO14644 系列標準中,有2標準已進行更新改版,以因應最新科技的發展並符合市場需求,分別為是 ISO 14644-1:2015 以及 ISO 14644-2:2015 。
ISO 14644-1:2015
潔淨室與相關的控制環境 - Part1:空氣中微粒與其空氣潔淨度分級( ISO 14644-1:2015 Cleanrooms and
associated controlled environments - Part 1: Classification of air cleanliness
by particle concentration)
ISO 14644-2:2015
潔淨室與相關的控制環境 - Part2:透過空氣中微粒濃度的監控記錄,監督潔淨室的對於空氣潔淨度的控制能力,並提供一個基本架構用來進行潔淨室的監督與分級。( ISO 14644-2:2015 Cleanrooms and
associated controlled environments -- Part 2: Monitoring to provide evidence of
cleanroom performance related to air cleanliness by particle concentration)
ISO 14644 協助改善對於空氣中汙染粒子的管理能力
更多 ISO 14644 標準家族
Part 1:空氣潔淨度之分級 Classification of air cleanliness
Part 2::透過空氣中微粒濃度的監控記錄,監督潔淨室的對於空氣潔淨度的控制能力 Specifications for testing and
monitoring to prove continued compliance with ISO 14644-1
Part 3:測試方法 Test Methods
Part 4:設計、建造與啟用 Design, construction and start-up
Part 5:運行 Operations
Part 6:詞彙 Vocabulary
Part 7:分離裝置,潔淨空氣罩,手套箱,隔離器和迷你作業環境 Separative devices (clean air hoods,
gloveboxes, isolators and minienvironments)
Part 8:空氣化學濃度分級(ACC) Classification of airborne
molecular contamination
Part 9:空氣微粒濃度的表面潔淨度分級 Classification of surface particle
cleanliness
Part 10:表面化學濃度的表面潔淨分級 Classification of Surface Cleanliness by
Chemical Concentration