- Chứng nhận sản phẩm Châu Âu CE
- Chứng nhận thiết bị y tế Trung
- Chứng nhận thực phẩm&dược phẩm FDA
- Chứng nhận sản phẩm của EU
- Chứng nhận sản phẩm Bắc Mỹ
- Chứng nhận Mỹ
- Chứng nhận UL của Mỹ
- Chứng nhận FCC Mỹ
- Chứng nhận của Bộ Giao thông Vận tải DOT Hoa Kỳ
- Chứng nhận Hiệp hội Dầu khí API Hoa Kỳ
- Chứng nhận Hiệp hội Nội thất Văn phòng BIFMA của Mỹ
- Chứng nhận khẩu trang NELNSON của Mỹ
- Thử nghiệm CPSIA An toàn Sản phẩm Tiêu dùng Hoa Kỳ
- Chứng nhận Hội kỹ sư ô tô Mỹ SAE
- Chứng nhận điện tử ETL Hoa Kỳ
- Chứng nhận Canada
- Chứng nhận Mexico
- Chứng nhận Mỹ
- Chứng nhận sản phẩm Nam Mỹ
- Chứng nhận sản phẩm EAC Liên minh HQ
- Chứng nhận sản phẩm Trung Đông
- Chứng nhận sản phẩm châu Á
- Chứng nhận sản phẩm Đài Loan
- Chứng nhận sản phẩm châu Phi
- Chứng nhận sản phẩm của Úc
- Chứng nhận sản phẩm Halal
- Chứng nhận sản phẩm Do Thái Kosher
- Loại một thiết bị y tế cho hồ
- Chứng nhận sản phẩm Trung Quốc
- Chứng nhận sản phẩm hữu cơ
- Chứng nhận an toàn hóa chất MSDS
- Chứng nhận sản phẩm CB
- Kiểm tra an toàn / kiểm tra sản phẩm
- Kiểm tra sản phẩm / lấy mẫu sản phẩm
- Tiêu chuẩn sản phẩm các quốc gia
- CHỨNG NHẬN HACCP
◆ORIGO chứng nhận quốc tế ◆
◆Sanwei International
Certification Ltd◆
Email.:salestw.origo@gmail.com
Chất lượng dịch vụ : Chuyên nghiệp, công bằng và công chính
Thái độ làm việc.: chính trực, nghiêm ngặt, tận tình
Chứng nhận mang tính bắt buộc, và cơ quan chứng nhận là cơ quan chứng nhận đăng ký có MIC được phê duyệt bởi thiết bị vô tuyến được chỉ định. TELEC (Telecom Engineering Center) là cơ quan chứng nhận đăng ký chính cho chứng nhận tuân thủ thiết bị vô tuyến điện tại Nhật Bản.
(1) Các tiêu chuẩn chứng nhận TELEC Các tiêu chuẩn kỹ thuật được công nhận đề cập đến việc phân loại và các tiêu chuẩn kỹ thuật của thiết bị vô tuyến được liệt kê trong hệ thống chứng nhận tuân thủ quy chuẩn kỹ thuật của trang web chính thức của nó. Cần lưu ý rằng khi các tiêu chuẩn kỹ thuật này và “Quy định thiết bị điện vô tuyến” (Radio Regulatory Commission Rules No. 18) có sự khác biệt về yêu cầu kỹ thuật, lấy “Quy định thiết bị điện vô tuyến” làm chuẩn.
(2) Các loại Chứng nhận TELEC bao gồm chứng nhận kiểm tra (Test Certification ) và chứng nhận hình thức (Type Certification) . Kiểm tra và cấp giấy chứng nhận được xác minh cho mỗi đơn vị thiết bị, mỗi người trong số các xác thực chỉ dành cho đơn vị thiết bị thông qua một giá trị xác nhận; Sản phẩm WiFi và Bluetooth là giống với tiêu chuẩn châu Âu EN300 328 trong đó 2.4GHz sản phẩm WiFi (802.11b/ g, 2412 ~ 2472 tiêu chuẩn MHz) và sản phẩm Bluetooth sư dụng tiêu chuẩn MIC Notice No.88 Annex43, nhưng đối với các sản phẩm 2.4GHz WiFi 14 (Channel 14: 2471 ~ 2497MHz) là cần thiết để sử dụng một thử nghiệm riêng biệt và Annex44 ban hành báo cáo, Các khoản phí tương ứng cũng cần phải tăng.
Đối với sản phẩm 5GHz WiFi (802.11a, 5180 ~ 5320MHz, W52 Band và W53 Band) được tuân thủ tiêu chuẩn thử nghiệm Annex45, nhưng cần lưu ý rằng, chương trình dữ liệu, MIC sẽ được đưa vào sửa đổi Annex45, thiết bị 5.6GHz (Band W56) cũng phân loại vào Annex 45 và yêu cầu kiểm tra DFS nghiêm ngặt hơn cho Band 56.
TELEC (TelecomEngineering Center) là cơ quan chứng nhận đăng ký chính cho chứng nhận tuân thủ thiết bị vô tuyến điện tại Nhật Bản.
"Luật thiết bị vô tuyến" của Nhật yêu cầu rằng thiết bị vô tuyến được chỉ định phải được phê duyệt loại hình (nghĩa là, chứng nhận tuân thủ quy chuẩn kỹ thuật). Chứng nhận là bắt buộc, và cơ quan chứng nhận là cơ quan chứng nhận đăng ký có MIC được phê duyệt bởi thiết bị vô tuyến được chỉ định.
(1) Tiêu chuẩn chứng nhận TELEC
Các tiêu chuẩn kỹ thuật cho việc chứng nhận đề cập đến việc phân loại và các tiêu chuẩn kỹ thuật của các thiết bị vô tuyến được liệt kê trong các quy định kỹ thuật và các hệ thống chứng nhận tuân thủ trang web của họ. Đáng chú ý là khi các tiêu chuẩn kỹ thuật này khác với các yêu cầu kỹ thuật của “Luật thiết bị vô tuyến” (Radio Regulatory Commission Rules No. 18), lấy “Luật thiết bị vô tuyến” làm chuẩn.
(2) Loại chứng nhận
Chứng nhận TELEC bao gồm: Chứng nhận kiểm tra (Test Certification ) và Chứng nhận hình thức (Type Certification).
Chứng nhận kiểm tra được thực hiện cho mỗi đơn vị thiết bị và chứng nhận này chỉ có giá trị cho mỗi đơn vị thiết bị đã được kiểm chứng;
Loại chứng chỉ đề cập đến số lượng mẫu của thiết kế tương tự và sản xuất thiết bị để xác minh rằng chứng chỉ có giá trị trong các lô thiết bị, nhưng nếu thiết kế hoặc sản xuất các thiết bị đã thay đổi, thiết bị sẽ cần phải tái xác nhận
Cần lưu ý rằng việc sử dụng các đài vô tuyến năng lượng thấp và thiết bị đầu cuối của họ đòi hỏi phải có giấy phép từ MIC.
Ngoài ra, chứng nhận tuân thủ cho thiết bị đầu cuối viễn thông có thể được chia thành hai tình huống:
a) Đối với các thiết bị điện thoại thông thường, miễn là chứng chỉ JTEC được yêu cầu theo Luật Viễn thông;
b) Đối với thiết bị đầu cuối không dây, ngoài chứng chỉ JATE theo quy định của Luật Viễn thông, phải có chứng nhận TELEC theo Luật thiết bị vô tuyến.
Thiết bị truyền thông không dây Chứng nhận TELEC cần gửi thông tin:
(1) Bảng mẫu thông số kỹ thuật (Technical TypeSpecification Form).
(2) Tuyên bố về Hệ thống Quản lý Chất lượng (Declarationof Quality Management System).
(3) Phương pháp phê duyệt đối với chứng chỉ chất lượng hoặc chứng chỉ ISO 9001 (Letter of Quality ControlConfirmation MethodorManufacturer’s ISO 9001 Certificate).
(4) Thư xác nhận bảo vệ cơ cấu (LetterofConstruction Protection Confirmation)
(5) Tuyên bố công xuất ngạch định (Rated PowerDeclaration).
(6) Báo cáo Ăng ten (AntennaReport)
(7) Báo cáo kiểm tra (TestReports(including Test Results, Test Setup Photos and Examinations carriedout)
(8) (Block Diagram, SchematicDiagram, Bill ofMaterial, Parts Placement, IC Data Sheets, Internal andExternal Photos, ProductDescription, User manual, Operational/TechnicalDescription, Description ofPheripherals/Accessories) .
(9) Thông tin về nhãn (LabelInformation(Label Location, Label content)) If you act as agentoras authorized representative of themanufacturer:
(10) Giấy uỷ quyền (Power of Attorney / AuthorizationLetter).
Giải thích: Tất cả các tài liệu được đệ trình là các tài liệu tiếng Nhật, và các tài liệu tiếng Anh cũng được chấp nhận. Báo cáo thử nghiệm có thể bằng ngôn ngữ mà tổ chức kiểm nghiệm địa phương sử dụng.
Sản phẩm WLAN, Bluetooth của chứng nhận TELEC
TELEC là chứng nhận bắt buộc của Nhật Bản cho các sản phẩm không dây, một số tương tự như SRRC trong nước. Nó tuân theo luật cống vô tuyến Nhật Bản. Các đặc điểm kiểm tra cụ thể là để làm theo các MIC
(Bộ Nội vụ) quy định NoticeNo.88, xem liên kết sau: http: //www.tele.soumu.go.jp/j/material/test.htm kiểm tra bảo trì đặc điểm kỹ thuật cập nhật được thực hiện bởi Bộ TT & TT. Dự án thử nghiệm cho các sản phẩm WiFi và Bluetooth cơ bản tương tự như tiêu chuẩn Châu Âu EN300 328.
Trong đó WiFi 2.4GHz sản phẩm (802.11b / g, 2412 ~ 2472 MHz) tiêu chuẩn Bluetooth và các sản phẩm cho MIC Notice No. 88 Annex43, nhưng đối với 14 kênh 2.4GHz WiFi sản phẩm (Channel14: 2471 ~ 2497MHz) là cần thiết để sử dụng riêng biệt Phụ lục 44 tiến hành kiểm tra và báo cáo, và các khoản phí tương ứng cũng cần phải tăng.
Đối với tiêu chuẩn thử nghiệm sản phẩm 5GHz WiFi (802.11a, 5180 ~ 5320MHz, W52 Band và W53 Band) được theo sau Annex45, cần lưu ý rằng, chương trình dữ liệu, MIC sẽ được đưa vào sửa đổi Annex45, thiết bị 5.6GHz (BandW56) cũng trở lại vào Annex 45 và yêu cầu kiểm tra nghiêm ngặt hơn về DFS của ban nhạc Band 56.
------------------------------------------------------------------------------------------------
Introduction to Japan's TELEC Certification The Radio Law requires model approval of designated radio equipment (ie, technical regulatory compliance certification).
Certification is mandatory, and the certification body is a registered certification body whose MIC is approved by the designated radio equipment. TELEC (Telecom Engineering Center) is the major registered certification body for Japanese radio equipment conformity certification.
(1) TELEC accreditation standards The accredited technical standards refer to the classification and technical standards of the specified radio equipment listed in its official website technical regulations compliance certification system. It is worth noting that when these technical standards differ from those of the Radio Regulatory Commission Rules No. 18, the Radio Regulations shall prevail.
(2) Types of certification TELEC certification includes Test Certification and Type Certification. Test certification is performed on each equipment unit. The certification is valid for each validated equipment unit. WiFi and Bluetooth products have a test project that is basically similar to the European standard EN300 328. One of the 2.4GHz WiFi products (802.11b) /g,2412~2472 MHz) and Bluetooth products use the MIC Notice No.88 Annex43, but for the 14-channel (Channel 14:2471 ~ 2497 MHz) of the 2.4 GHz WiFi product, it is necessary to use the Annex44 alone to test and issue reports. The corresponding fees also need to increase.
The test standard for 5GHz WiFi products (802.11a, 5180-5320MHz, W52 Band, and W53 Band) follows the Annex 45, but it should be noted that the data shows that MIC will modify Annex 45 in the near future and the 5.6GHz device (Band W56) Classified into Annex 45, and has more stringent DFS testing requirements for Band 56.
TELEC (Telecom Engineering Center) is the major registered certification body for compliance certification of radio equipment in Japan.
Japan's "Radio Law" requires that the designated radio equipment be type-approved (ie, technical regulatory compliance certification). Certification is mandatory, and the certification body is a registered certification body whose MIC is approved by the designated radio equipment.
(1) TELEC Certification Standard
The technical standards for certification refer to the classification and technical standards of listed radio devices listed in their official website technical regulations and compliance certification systems. It is worth noting that when these technical standards differ from those of the Radio Regulatory Commission Rules No. 18, the Radio Regulations shall prevail.
(2) Type of certification
TELEC certification includes: Test Certification and Type Certification.
Test certification is performed for each equipment unit, and this certification is only valid for each verified equipment unit;
Type certification refers to the verification of samples of a batch of equipment that are also designed and manufactured. This certification is valid for the batch of equipment, but if the design or manufacturing of the equipment has changed, the equipment will need to be re-certified.
It is worth noting that the use of non-low-power radio stations and their terminal equipment requires a license from the MIC.
In addition, compliance certification for telecommunications terminal equipment can be divided into two situations:
a. For ordinary telephone devices, as long as the JTEC certification is required by the Telecommunications Law;
b. For wireless terminal equipment, in addition to JATE certification as required by the Telecommunications Law, TELEC certification is required according to the Radio Law.
Wireless communication equipment TELEC certification need to submit information
(1) Technical Type Specification Form
(2) Declaration of Quality Management System
(3) Approval method for quality certificate or ISO 9001 Certificate (Letter of Quality Control Confirmation MethodorManufacturer’s ISO 9001 Certificate)
(4) Letter of Protection Protection Confirmation
(5) Rated PowerDeclaration
(6) Antenna Report (AntennaReport)
(7) Test Reports (including Test Results, Test Setup Photos and Examinations carriedout)
(8) (Block Diagram, SchematicDiagram, Bill ofMaterial, Parts Placement, IC Data Sheets, Internal and External Photos, ProductDescription, User manual, Operational/TechnicalDescription, Description of Pheripherals/Accessories)
(9) Label information (Label Location, Label content) If you act as agentoras authorized representative of the manufacturer:
(10) Power of Attorney / Authorization Letter
Explanation: All submitted documents are proposed as Japanese documents, and English documents are also acceptable. The test report can be in the language used by the local testing organization.
WLAN, TELEC certification of Bluetooth products
TELEC is Japan's mandatory certification for wireless products, some similar to the domestic SRRC. It follows the Japanese radio law. The specific test specification is to follow the MIC
(Ministry of Internal Affairs and Communications of Japan) Notice No.88 Regulation, see the following link: http://www.tele.soumu.go.jp/j/material/test.htm The update of the test specification is also performed by the MIC. The test project for WiFi and Bluetooth products is basically similar to the European standard EN300 328.
The standard for 2.4GHz WiFi products (802.11b/g, 2412~2472 MHz) and Bluetooth products is MIC Notice No.88 Annex43, but 14 channels (Channel14:2471 ~ 2497MHz) for 2.4GHz WiFi products need to be used separately. Annex44 conducts tests and reports, and the corresponding fees also need to increase.
The test standard for 5GHz WiFi products (802.11a, 5180-5320MHz, W52 Band, and W53 Band) follows the Annex 45, but it should be noted that the data shows that MIC will modify Annex 45 in the near future and return the 5.6GHz device (BandW56). Into Annex 45, and more stringent DFS test requirements for the Band 56 band.
------------------------------------------------------------------------------------------------
日本TELEC認證簡介 《無線電法》要求,對指定的無線電設備進行型號核准(即技術法規符合性認證)。
認證是強制性的,認證機構為MIC在指定無線電設備範圍認可的註冊認證機構。TELEC(Telecom Engineering Center)是日本無線電設備符合性認證的主要的註冊認證機構。
(1) TELEC認證標準 認證的技術標準參見其官網上技術法規符合性認證系統中的所列出的指定無線電設備的分類和技術標準。值得注意的是,這些技術標準與《無線電法規》(Radio Regulatory Commission Rules No. 18)的技術要求有差異時,以《無線電法規》為准。
(2)認證類型 TELEC認證包括測試認證(Test Certification)和型式認證(Type Certification)。測試認證是針對每一個設備單元進行驗證,該認證只對每一個經過了驗證的設備單元有效; WiFi和Bluetooth產品其的測試專案基本上與歐標的EN300 328類似. 其中2.4GHz WiFi產品(802.11b/g,2412~2472 MHz)和Bluetooth產品使用的標準為MIC Notice No.88 Annex43,但是對於2.4GHz WiFi產品的14通道(Channel 14:2471 ~ 2497MHz)則需要單獨使用Annex44進行測試和出具報告,相應的規費也需要增加。
對於5GHz WiFi產品(802.11a,5180~5320MHz,W52 Band和W53 Band)遵循的測試標準為Annex45,但是需要注意的是,資料顯示,MIC近期將會修改Annex45,將5.6GHz設備(Band W56)也歸入Annex45,並且對Band 56頻段有更加嚴格的DFS測試要求。
TELEC(TelecomEngineering Center)是日本無線電設備符合性認證的主要的註冊認證機構。
日本《無線電法》要求,對指定的無線電設備進行型號核准(即技術法規符合性認證)。認證是強制性的,認證機構為MIC在指定無線電設備範圍認可的註冊認證機構。
(1) TELEC認證標準
認證的技術標準參見其官網上技術法規符合性認證系統中的所列出的指定無線電設備的分類和技術標準。值得注意的是,這些技術標準與《無線電法規》(Radio Regulatory Commission Rules No. 18)的技術要求有差異時,以《無線電法規》為准。
(2)認證類型
TELEC認證包括:測試認證(Test Certification)和型式認證(Type Certification)。
測試認證是針對每一個設備單元進行驗證,該認證只對每一個經過了驗證的設備單元有效;
型式認證是指對同樣設計和製造的一批設備的樣品進行驗證,該認證對該批設備都有效,但如果設備的設計或製造發生了改變,設備將需要重新認證
值得注意的是,對於非低功率無線電站及其終端設備的使用需要向MIC申請執照。
此外,對於電信終端設備的符合性認證分兩種情況:
a.對於普通電話裝置,只要按電信事業法要求進行JATE認證;
b.對於無線的終端設備,除了需要按電信事業法要求進行JATE認證外,還需要按無線電法要求進行TELEC認證。
無線通訊設備TELEC認證需要提交的資料
(1)技術型號規格表(Technical TypeSpecification Form)
(2)品質申明管理系統(Declarationof Quality Management System)
(3)品質證書的控制批准方法或者ISO9001證書(Letter of Quality ControlConfirmation MethodorManufacturer’s ISO 9001 Certificate)
(4)結構保護批准證書(LetterofConstruction Protection Confirmation)
(5)宣稱的額定功率(Rated PowerDeclaration)
(6)天線報告(AntennaReport)
(7)測試報告(TestReports(including Test Results, Test Setup Photos and Examinations carriedout))
(8)(Block Diagram, SchematicDiagram, Bill ofMaterial, Parts Placement, IC Data Sheets, Internal andExternal Photos, ProductDescription, User manual, Operational/TechnicalDescription, Description ofPheripherals/Accessories)
(9)標籤信息(LabelInformation(Label Location, Label content))If you act as agentoras authorized representative of themanufacturer:
(10)委託書/授權書(Power of Attorney / AuthorizationLetter)
說明:所有遞交的文檔建議為日文文檔,英文文檔也可被接受。測試報告可以用當地測試機構所用語言。
WLAN,Bluetooth產品的TELEC認證
TELEC是日本針對無線產品的強制性認證,有些類似於國內的SRRC。其遵循的是日本的電波法。具體的測試規範則是遵循MIC
(日本總務省)NoticeNo.88法規,見如下連結:http://www.tele.soumu.go.jp/j/material/test.htm 測試規範的更新維護也是由MIC來進行。WiFi和Bluetooth產品其的測試專案基本上與歐標的EN300 328類似.
其中2.4GHz WiFi產品(802.11b/g,2412~2472 MHz)和Bluetooth產品使用的標準為MIC Notice No.88 Annex43,但是對於2.4GHz WiFi產品的14通道(Channel14:2471 ~ 2497MHz)則需要單獨使用Annex44進行測試和出具報告,相應的規費也需要增加。
對於5GHz WiFi產品(802.11a,5180~5320MHz,W52 Band和W53 Band)遵循的測試標準為Annex45,但是需要注意的是,資料顯示,MIC近期將會修改Annex45,將5.6GHz設備(BandW56)也歸入Annex45,並且對Band 56頻段有更加嚴格的DFS測試要求。